4+ flip kit install - real time help please (1 Viewer)

[slcfj62]

Ahem. To get this thread sort of back on topic, make sure you paint your U-Bolts now that you have the flip kit installed. They will rust big time if you don't.

 

[GLTHFJ60]

When and where is fall gathering? Much appreciated on the tools. If you could toss some extra parts in there while you're at it, I might be mobile for more than 30% of the next get-together.

Just to keep this on track a little bit, with the loss of upward travel that comes with putting top plates over the axles, are people doing anything with their bump stops? Or is travel limited more by tire and wheel well than the bump stop?

Fall Gathering is in Hancock, NH the weekend of October 2nd. That is put on by the Yankee Toys TLCA chapter. I'm definitely planning on going to it.

Its the 23-26 this month at rausch creek.

I would say the tire and wheel well will limit the travel. Most people will find out what the limit is and move the bump stop down to where it will stop travel before the tire hits anything. My suspension is way to stiff to travel that far.

Matt, don't you mean Fall Crawl?