Hello all! I'm in ABQ. Looking to lift my 08 Sequoia. Are there any in the area?
2nd gen Sequoias!
- Thread starter Lobster1387
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I think most of us are driving land cruisers, that said, we have a UZJ100, we share the same drive train I believe. I installed a 1"body lift from Trail Taylor. Looking for a 2.5 OME to install in the future. what are your plans?
I have a 2012 Tundra with a 2.5 inch OME lift, but I have leaf springs on the rear axle, and I am guessing you may have coil springs on the rear axle of the Sequoia?
I got my lift kit from Slee Off Road. You could check their website and see if they have anything for a Sequoia.
Good luck! I would like to check that out if you make it happen. Don’t see too many lifted Sequoias around.
I got my lift kit from Slee Off Road. You could check their website and see if they have anything for a Sequoia.
Good luck! I would like to check that out if you make it happen. Don’t see too many lifted Sequoias around.
In case you have not found it yet, there is a dedicated Sequoia forum here at MUD.
- Thread starter
- #5
Thank you everyone! And yes, I have checked the Tundra/Sequoia pages and most are 1st Gen. I have a few feelers out there but no responses yet.
Someone mentioned Slee yesterday so I'll definitely have to check them out!
I'm looking at either a Dobinsons set up or one that I've kinda put together myself consisting of Bilstein fully adjustable front coilovers with one/arb rear springs and 5100 rear shocks.
And... I know and have worked with Shawn. Please don't hold that against me hahaha.
Someone mentioned Slee yesterday so I'll definitely have to check them out!
I'm looking at either a Dobinsons set up or one that I've kinda put together myself consisting of Bilstein fully adjustable front coilovers with one/arb rear springs and 5100 rear shocks.
And... I know and have worked with Shawn. Please don't hold that against me hahaha.
