Just trying to get a feel for what it's worth.
I bought it about a year ago and have put about 4,000 miles on it, most of which were street miles. I lost interest in this project and just want the money for other things. No rust at all. Very clean overall. >192,000 miles. I have all the stock parts except for the 3rd row seats. Smooth running motor. Has clear NV title.
PHH done at 188,000 miles with silicone hose and clamps from 1fzfephh.com
New Timken wheel bearings front and rear
Rebuilt knuckle swivels with kit from cruiser outfitters
ARB front bumper
ARB lockers front and rear
ARB air compressor
Nitro 4.88's (installed with lockers and all new bearings at Adam's driveline in Las Vegas)
Slee sliders
Slee transfercase skid
Slee 4'' suspension kit (springs, shocks, bump stop spacers, brake lines, drive shaft, adjustable panhard bars, caster plates...)
BFGoodrich 315/75-16 KM2's (just barley wore off the nipples)
Borla cat back exhaust
Man a fre HD tie rod and relay rod with new rod ends
Man a fre adjustable upper control arms
Everything listed above was bought new and have less than 3,000 miles.
I'm sure there is more I am forgeting but you get the idea. For price I am thinking $15,000.
I bought it about a year ago and have put about 4,000 miles on it, most of which were street miles. I lost interest in this project and just want the money for other things. No rust at all. Very clean overall. >192,000 miles. I have all the stock parts except for the 3rd row seats. Smooth running motor. Has clear NV title.
PHH done at 188,000 miles with silicone hose and clamps from 1fzfephh.com
New Timken wheel bearings front and rear
Rebuilt knuckle swivels with kit from cruiser outfitters
ARB front bumper
ARB lockers front and rear
ARB air compressor
Nitro 4.88's (installed with lockers and all new bearings at Adam's driveline in Las Vegas)
Slee sliders
Slee transfercase skid
Slee 4'' suspension kit (springs, shocks, bump stop spacers, brake lines, drive shaft, adjustable panhard bars, caster plates...)
BFGoodrich 315/75-16 KM2's (just barley wore off the nipples)
Borla cat back exhaust
Man a fre HD tie rod and relay rod with new rod ends
Man a fre adjustable upper control arms
Everything listed above was bought new and have less than 3,000 miles.
I'm sure there is more I am forgeting but you get the idea. For price I am thinking $15,000.
Last edited:
