1994 80 series FRONT Propeller / Driveshaft length.

[Ribz0]

Hi all.
Im needing to order a new front driveshaft for my 1994 auto with 1FZ-FE. I have done the rounds and having problems sourcing one.
Im looking at a genuine item but wanted to confirm the length before I sell a kidney to purchase one. The part number I have is;
37140-60340
My current shaft that is fitted has a length of 817mm. I did this measurement with front shaft on the car, and the car sitting on its own weight. I'm sure there might be a few mm in the measurement, but can people out there please confirm the length before I purchase. *MUST BE AUTO* with A442F
Thanks in advance.
Eric

 

[csanders]

If you're ordering 37140-60340, you shouldn't have any fitment issues. That should be the correct part number for your driveline with the 1FZ-FE and auto box. I have my front driveshaft out of my 80 and it measures to right about 800mm, but the lengths will vary depending on how compressed the slip yoke is.

 

[Ribz0]

If you're ordering 37140-60340, you shouldn't have any fitment issues. That should be the correct part number for your driveline with the 1FZ-FE and auto box. I have my front driveshaft out of my 80 and it measures to right about 800mm, but the lengths will vary depending on how compressed the slip yoke is.

Thanks very much for your feedback... 800mm is close enough so good to get some confirmation... the slip joint has more than 17mm movement so I'm happy with that.