1988 FJ62 Parting out Asheville NC

[DHracer3]

Location

United States

I just bought a 1988 FJ62 which is in rough condition body wise but had a great motor in! I will be using the motor and wiring harness but just about everything else I need to get out.

Most of the Body is in ROUGH! shape.. the guy I bought it from parts these things out like nobodies business! literally has a huge factory with engine parts and transmissions lying on the ground...

Anyways Its a 88 FJ62.

Has good windshield and rear side glass..
Window motors
Steel wheels no tires.... they are shot.
rear axle
Transmission Automatic very good... (the motor has only 92000miles)
everything on the interior is up for grabs.
Tailgate is good with little rust on the corners and small dent but is in tact.
Lift hatch is good no glass though.

Just ask what you need and I will get some pictures of it.
This truck was pretty beat up and was obviously used as a hunting truck... just a hunch...

Let me know what you need.

email me geritt@morewoodbikes.com

 

[CruisinFJ60]

wanna sell me the down pipes off of the motor? where they conect to the exhaust manifold and about 12" below that.

 

[Boosted91]

Grab bar over glove box ? How much ?

 

[DHracer3]

grab bar is sold.... everything motor related I need to keep unfortunately..... I may need it..

 

[cmblackmon]

How much for the wheels?

 

[DHracer3]

wheels

How much for the wheels?

set of 4 I'll take $75

 

[cosmo]

rear sway bar in good shape? if so how much for it and the mounting hardware to 97701

 

[leos3]

How much for the tranny?
And windows motors?
Nick

 

[DHracer3]

I'll take $500 for the transmission. it is still in the truck and is running so you can test it out.

 

[DHracer3]

Window motors I think $30 a motor.

 

[DHracer3]

swaybar

rear sway bar in good shape? if so how much for it and the mounting hardware to 97701

Sway bar is good shape. will sell for $120 shipped to 97701

 

[DHracer3]

I need to pull the transmission out soon so I can pull other parts out... don't want to pull the transmission out until someone wants to buy it.... low mileage only 92500 miles runs really smoothly!

 

[Mike FJ62]

Thank you

Received my item today, looks good, thanks for the prompt delivery DHracer3.

Mike

 

[vipergrhd]

a pillar grab bar

dibs on the grab bar on the a-pillar,let me know how much and ship to 94565. thanks.

John

 

[DHracer3]

The guy above you just received that handle.....

 

[DustyFJ]

I'd love to have the Transfer L4 position switch off of the transfer case, still have it?

 

[DHracer3]

I'm sure I do.. let me know exactly what it is and I will look for it... I think I know what it is... I will take some pictures to make sure I have the right thing.

 

[DustyFJ]

I'm sure I do.. let me know exactly what it is and I will look for it... I think I know what it is... I will take some pictures to make sure I have the right thing.

its the sensor on the t-case that has only one wire going to it. I think Thats why I cant get into 4L. Maybe I can buy all three sensors off of you. What are they worth??

 

[DHracer3]

I know there is a L4 switch but for the rest of the gears there is a shifter... L4 is the only push button switch. I could do the L4 switch for $15 shipped.?

 

[DustyFJ]

Im not talking about the switch in the cab, I mean the switch on the side of the transfer case that monitors the position of the mechanical lever that goes from 2 hi , N, 4 lo. Maybe we were already on the same page, I'm easily confused. 15 sounds great thanks

PM sent