Do you have the pop rivets from the door panels? I need as many of those as you have! PM me your paypal address and how much you want for them. Thanks!
1988 FJ62 Parting out Asheville NC
- Thread starter DHracer3
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #42
- Thread starter
- #45
The Tail lights are in rough condition... the rear passenger is broken and the other side is in decent shape...
Also interested in (#35) instrument benzel if its in good condition, no cracks. If the other guy passes. I'm not necessarily interested in the guages but if you don't want to bother with taking them off, that's fine. Also would like a few of the bolts that hold the seats to the floor. I've stripped a couple.
I can do PayPal. Shipping is to 75904
email me at dwillmo@consolidated.net
I can do PayPal. Shipping is to 75904
email me at dwillmo@consolidated.net
- Joined
- Feb 4, 2008
- Threads
- 4
- Messages
- 30
what kind of shape are the passenger side doors?
- Thread starter
- #48
The body on the car is in rough shape... I think there is quite a bit of rust on the body but the mechanical parts on this Cruiser all have under 100K miles on them.. The owner obviously didn't like to wash cars...
Disk brakes, front and rear, shipped to 94556.
Thanks,
Singh
Thanks,
Singh
- Joined
- Jan 16, 2003
- Threads
- 345
- Messages
- 3,656
- Location
- Charleston
- Website
- www.oldenorthstatecruisers.com
PM sent on tranny
- Thread starter
- #53
I think so.. I need to check .. can you send a diagram that shows the part? if you go to SOR.com they have the diagrams...
- Thread starter
- #54
I have the disc with the hubs... I used a bit of the parts off the Disc for a conversion that was still missing parts... I have disc calipers that were just repainted but I used another set that seemed in better condition.
Let me know exactly what parts you need... I used the bottom pins from the knuckles and the bolts that attach the spindles.. I have used the bolts that attach the calipers to the knuckle.... everything else I have.
The Rear has drum brakes.
4wd solenoid thingy - under the hood dont need the vacccum hoses running in and out of it, and windshield washer fluid cap. Can pick up- flying into Asheville on the 23 and again on the 27 of this month
- Thread starter
- #56
Yep I can sell the solenoid vacuum thing for $120? I'll throw in the washer cap.
- Thread starter
- #57
Ok so the Tail lights are no good.. the previous owner bought FJ80 lights and instead of getting the proper ones he stuck them on anyways and filled it up with foam and then bondo'd the hell out of the rear to make them look legit.... ! hahaha so funny.
- Thread starter
- #59
I don't have that rubber thing....
- Joined
- Sep 6, 2002
- Threads
- 243
- Messages
- 3,587