- Thread starter
- #561
Builds 1979 FJ40 Preservation-ish Project (1 Viewer)
- Thread starter OPMACHINE
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #562
Got the rear heater blower motor working yesterday. Super satisfying little project.
- Joined
- Feb 10, 2002
- Threads
- 550
- Messages
- 44,771
- Location
- Canton, Mississippi
- Website
- www.seeandeatms.com
What was wrong with it?
- Thread starter
- #564
The wire solder came loose on the brush side in the motor. I resoldered the wire and then cleaned and regreased the spindle bearing.
- Thread starter
- #565
I absolutely love this truck!! I have had so much fun with the family this week.
- Joined
- Feb 10, 2002
- Threads
- 550
- Messages
- 44,771
- Location
- Canton, Mississippi
- Website
- www.seeandeatms.com
A properly sorted 40 is a great ride. Most people never know the way they can be
Beautiful truck! Your photos are REALLY encouraging me to go topless this summer. It looks so good!
- Thread starter
- #568
Hardest part is getting the wife and kids to ride with me when its cold!
mattressking
10 digits to freedom
I'm scared to find out what cold is there.....
- Thread starter
- #570
Anything below 50
- Thread starter
- #571
I still have a lingering issue with the rear brake squeak.
Starts when the pad comes in contact with the inside of the drum. I cannot get it to squeak squeak when breaking in reverse and goes away if a slam on the breaks hard enough. I have been telling myself the pads just needs to ''seat'' to the drum, I now suspect an alignment issue with the two brake cylinders.
Starts when the pad comes in contact with the inside of the drum. I cannot get it to squeak squeak when breaking in reverse and goes away if a slam on the breaks hard enough. I have been telling myself the pads just needs to ''seat'' to the drum, I now suspect an alignment issue with the two brake cylinders.
