1972 land cruiser Frame and title body is 77.
Chevy drive train
Chevy 5.7 TPI
sm465 rebuilt but leaking out of the pto covers. ez fix
centerforce clutch new
np205 inspected and all seals and gaskets replaced. clocked up and rails modified for twin stick.
14b FF 3.73 gears
dodge dana 60 front 4.56
engine has new plugs, wires, cap rotor, summit block huggers, edlebrock high flow water pump, bbk TB, power master ultra torque starter and painless wiring
ecu was chipped for swap all stock maps just took out the vats and auto trans stuff. advanced adapters aluminum radiator with black magic electric fan.
custom fuel cell with internal baffles, bbk fuel pump SS braided lines and AN fittings throughout.
hydroboost brakes 4 wheel disc. needs 2 rear calipers and lines ran.
other misc items like autometer gauges tach, speedo, oil, fuel and water.
sony cd radio new, no speakers, cobra cb, h4 conversion with hid's LED taillights and front blinkers.
painless body harness is about 90% done.
she fires up, need to add muffler and finish exhaust. 2 /12 to 3"
front suspension is leaf springs from a xj. they are new re i think. suspension is adjustable several mounting positions. needs shocks and hoops.
rear suspension is 4 link needs coilovers/air shocks
lower links are 2" dom uppers are 1.75 dom. all joints are fk, not cheap.
all grade 8 hardware.
37" iroks about half tread no rock rash.
definitely a project that could be finished in a couple weeks. I know i'm missing some stuff it's been awhile since i worked on her. just lost interest
salvaged AZ title in hand
asking $8,000
Chevy drive train
Chevy 5.7 TPI
sm465 rebuilt but leaking out of the pto covers. ez fix
centerforce clutch new
np205 inspected and all seals and gaskets replaced. clocked up and rails modified for twin stick.
14b FF 3.73 gears
dodge dana 60 front 4.56
engine has new plugs, wires, cap rotor, summit block huggers, edlebrock high flow water pump, bbk TB, power master ultra torque starter and painless wiring
ecu was chipped for swap all stock maps just took out the vats and auto trans stuff. advanced adapters aluminum radiator with black magic electric fan.
custom fuel cell with internal baffles, bbk fuel pump SS braided lines and AN fittings throughout.
hydroboost brakes 4 wheel disc. needs 2 rear calipers and lines ran.
other misc items like autometer gauges tach, speedo, oil, fuel and water.
sony cd radio new, no speakers, cobra cb, h4 conversion with hid's LED taillights and front blinkers.
painless body harness is about 90% done.
she fires up, need to add muffler and finish exhaust. 2 /12 to 3"
front suspension is leaf springs from a xj. they are new re i think. suspension is adjustable several mounting positions. needs shocks and hoops.
rear suspension is 4 link needs coilovers/air shocks
lower links are 2" dom uppers are 1.75 dom. all joints are fk, not cheap.
all grade 8 hardware.
37" iroks about half tread no rock rash.
definitely a project that could be finished in a couple weeks. I know i'm missing some stuff it's been awhile since i worked on her. just lost interest
salvaged AZ title in hand
asking $8,000
everything else got sold quite some time ago. I have the side mounts for the sliders i was going to redo them with the UHMW you see in the pictures.
