- Year
- 1968
- Vehicle Model
- 40 Series
- Color
- rgb(0, 21, 255)
What's included for the price) $1,500
1968 Tub (rough but workable)
1968 Hardtop (solid) with all good glass
1968 Frame (solid)
1968 Rear axle (4:10) with Lock-Right locker
1968 Windshield frame (solid) with good glass
1976 Hood (solid)
1978 Front disc axle (4:10)
1968 Driver Fender
1968 Front heater
1968 Rear heater
1968 style BIB (SEE LAST PIC FOR THE BIB) I have other normal bibs if you don't want this unique one
1968 OEM gas tank (excellent condition) (no straps)
OEM gas tank cover
I think they are stock springs on all 4 corners
Passenger fender is an FJ25 fender (3 mounting holes)
Full roll cage (home made by a PO) they just added the front half onto the OEM rear roll bar.
I have an SOR fixed rear panel to include as the barn doors are gone.
Crappy uncomfortable driver seat from some unknown donor rig (no passenger seat)
Shackle reversal installed on front stock springs
Bikini Top
The rig also has a body lift
Front heavy duty bumper (tow bar brackets not included)
Details:
Titled as a 1976
Hardtop sides and fiberglass topper are solid and without known issues.
Rear gate works fine but does have some holes by the lift gate handle, like usual.
Driver and passenger floors have been replaced with steel plates
Rear bed floor is original and solid
Rockers (under doors) have been patched, and riveted, and bondo, etc....
Rear sill has been replaced with a piece of angle iron
Rear wheel wells have been cut
Lots of bondo on the back corners but metal under the bondo. I think they just filled in deep dents.
No engine, transmission, or transfer case but I do have extra 3-speed trans/transfer cases on the shelf if for some strange reason you want one.
Barn door hinges not included
1968 Tub (rough but workable)
1968 Hardtop (solid) with all good glass
1968 Frame (solid)
1968 Rear axle (4:10) with Lock-Right locker
1968 Windshield frame (solid) with good glass
1976 Hood (solid)
1978 Front disc axle (4:10)
1968 Driver Fender
1968 Front heater
1968 Rear heater
1968 style BIB (SEE LAST PIC FOR THE BIB) I have other normal bibs if you don't want this unique one
1968 OEM gas tank (excellent condition) (no straps)
OEM gas tank cover
I think they are stock springs on all 4 corners
Passenger fender is an FJ25 fender (3 mounting holes)
Full roll cage (home made by a PO) they just added the front half onto the OEM rear roll bar.
I have an SOR fixed rear panel to include as the barn doors are gone.
Crappy uncomfortable driver seat from some unknown donor rig (no passenger seat)
Shackle reversal installed on front stock springs
Bikini Top
The rig also has a body lift
Front heavy duty bumper (tow bar brackets not included)
Details:
Titled as a 1976
Hardtop sides and fiberglass topper are solid and without known issues.
Rear gate works fine but does have some holes by the lift gate handle, like usual.
Driver and passenger floors have been replaced with steel plates
Rear bed floor is original and solid
Rockers (under doors) have been patched, and riveted, and bondo, etc....
Rear sill has been replaced with a piece of angle iron
Rear wheel wells have been cut
Lots of bondo on the back corners but metal under the bondo. I think they just filled in deep dents.
No engine, transmission, or transfer case but I do have extra 3-speed trans/transfer cases on the shelf if for some strange reason you want one.
Barn door hinges not included
Last edited:
