Media 120 series Photos! (2 Viewers)

[DRANGED]

What front bumper is that? Looks great

rear too!
removed skin, and precision bending and welding? it looks great! Can you show a closer picture of how the hitch integrates with the stock bumper beam/frame member? That's not a Yota pintle hitch, right? Is that custom? did you cut the rear frame member for an insert to sleeve in deep enough? Or is that MT's high tuck bolted on to stock mounting?

So many questions
I see so many details!!

 

[ZIDCONPRO]

Down in NV.

Checking out Mt. Charleston area.

View attachment 2663461

View attachment 2663462

View attachment 2663463

View attachment 2663464

maybe someone will need them, rear lights from the Prado 120, I can find, $150 + delivery $45 for a pair of OEM Toyota.

maybe someone will need them, rear lights from the Prado 120, I can find, $150 + delivery $45 for a pair of OEM Toyota

 

[ArBrnSnpr]

Thanks for the comments fellas.

The front bumper is a Lil Bees bumper I picked up in CO. a about three years ago.

Now that I have my tubing bender set up, I'm toying with a new design so I may be changing it soon.

The rear bumper is my own creation. I have a few more items to finish on it before I call it "done" but it was at a point I could mount it for a road trip so here it sits.

The rear cross member is still intact. The hitch is a Metaltech high tuck. I'm actually going to be notching the crossmember and cutting a passage to allow full length hitches with it.
The tubing also extends to the frame just behind the rear wheels. There it bolts into the frame with plate steel.
These bends actually follow the contour of the body, minus 3" of sheet metal where the factory vent flaps sit. Those were cut away and I formed new sheet metal to give 3 extra inches of clearance below the bumper and an extra inch of room for the wheel to tuck.
The sheet metal was a pain in the ass weld!
I don't have many pictures now, but once it's all done and I've plated the top and sides of the bumper, I'll make a post about it.

 

[TLar25]

Thanks for the comments fellas.

The front bumper is a Lil Bees bumper I picked up in CO. a about three years ago.

Now that I have my tubing bender set up, I'm toying with a new design so I may be changing it soon.

The rear bumper is my own creation. I have a few more items to finish on it before I call it "done" but it was at a point I could mount it for a road trip so here it sits.

The rear cross member is still intact. The hitch is a Metaltech high tuck. I'm actually going to be notching the crossmember and cutting a passage to allow full length hitches with it.
The tubing also extends to the frame just behind the rear wheels. There it bolts into the frame with plate steel.
These bends actually follow the contour of the body, minus 3" of sheet metal where the factory vent flaps sit. Those were cut away and I formed new sheet metal to give 3 extra inches of clearance below the bumper and an extra inch of room for the wheel to tuck.
The sheet metal was a pain in the ass weld!
I don't have many pictures now, but once it's all done and I've plated the top and sides of the bumper, I'll make a post about it.

View attachment 2663833

View attachment 2663834

View attachment 2663835

View attachment 2663836

View attachment 2663837

Looks great. I wondered if it might be a lil b's. I just barely trimmed my factory rear bumper last night in preparation for a lift and 35's. In the future I'd like to do something similar to what you're doing.

 

[SKNKWRX]

Enjoying a little UT on the way to Moab for the Easter Ultra4 Race with the Sherpa Equipment crew.

 

[DRANGED]

Enjoying a little UT on the way to Moab for the Easter Ultra4 Race with the Sherpa Equipment crew.

View attachment 2667800

View attachment 2667801

View attachment 2667802

View attachment 2667804

I'll wave if I see ya.

 

[SKNKWRX]

I'll wave if I see ya.

This was Easter but I live in Durango and come often, also wave if you see me in my 1st Gen Runner

 

[silverhammer]

**SPOTTED** BoJack Horseman driving a GX?

 

[landwagon]

 

[ZIDCONPRO]

several people have made an order for the LRD radiator grille, if you need it, please write, maybe there will be a few more pieces in stock

 

[rmswins]

Fun in the desert. Need more break over clearance. And yes, I’ve run 6 cans on the back before. 3 fuel and 3 water, 30 gallons of fun.

 

[SKNKWRX]

Spent Sunday exploring a new trail in the San Juans, unfortunately snow stopped me short of making it all the way to the top and to the far end but still enjoyed myself.

 

[Lifted]

Near Trinidad, CA

 

[ArBrnSnpr]

Exploring northern Utah over the weekend.

 

[SKNKWRX]

Here is a 120 Series picture.

 

[TLar25]

Exploring northern Utah over the weekend.

View attachment 2682957

View attachment 2682958

View attachment 2682959

View attachment 2682960

Where all did you go? Looks like my neck of the woods

 

[DRANGED]

Exploring northern Utah over the weekend.

View attachment 2682957

View attachment 2682958

View attachment 2682959

View attachment 2682960

RAD!! Welcome!
You know, they spotted a wolverine out there off antelope island a few weeks ago! cray cray!!

Give a holler if you make it down Moab-way!
PS, I dig the prado tails.. that mod is on my radar too

 

[ArBrnSnpr]

I was up north of Odgen.
Went to Eden, Huntsville, Antelope Island, and found a random trail up off a ski slope that was closed.

I'm planning to hit Moab next month. I'll reach out for some trail ideas.

 

[nissanjon]

Finally washed the GX after installing the awning last fall.

 

[DRANGED]

Finally washed the GX after installing the awning last fall.
View attachment 2683078View attachment 2683079View attachment 2683082

Which awning is that (I'm moving towards the 270 idea)?
Nice deck with extending table!

Deets?