12 V power outlet (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 13, 2003
Threads
834
Messages
5,790
Location
North Front Range, CO
I am going to wire into the power seat and install a 12V outlet. Will I need to add a fuse or will the fuse for the power seat work?
kurt
 
If you are wiring into the power seat circuit your electrical device will be protected up to the amperage of the circuit that the power seats are on. ...sorry no manual at hand to tell you what that circuit is rated at. An extra fuse of lower amperage would protect your electrical device more than the circuit would by it's existing fuse.

When I do this mod, I will run a new wire from the fusebox, or even the battery to the outlet. Max amperage can only be achieved this way.
 
I will plug in the laptop and the aircompressor (not at same time)into that outlet.
kurt
 
Depending on the air compressor I would just get some battery clips and clip it directly to the battery when you need to inflate the tires. No risk of burning any wires, or blowing any fuses.
 
I have a set of those. I will see if I can reach around to all tires with the compressor. Great idea, thanks ;)
kurt
 

Users who are viewing this thread

Back
Top Bottom