100 Series General Tech and Classifieds

[77TLCFJ40]

The dealership threw these in with Jace's 100 due to poor tire rotation and subsequent wear on the front tires which WCT has already rotated for us. Planning on new rubber in the fall.

They are Tundra steelies with center caps and Nexen Roadian HT 255 70 18 with some life left. $275 for the set.

 

[Bomar]

For the people running syn in your hundo are you running 10w30 or 0w30? I am going to use Mobil 1 but don't know which to run. Leaning towards to 10 just do to the heat and it being a DD.

 

[dnp]

For the people running syn in your hundo are you running 10w30 or 0w30? I am going to use Mobil 1 but don't know which to run. Leaning towards to 10 just do to the heat and it being a DD.

I've always used:

Mobil 1 5W-30 EP (recommended weight) in the 03 GX (150,000 +/- miles)
Mobil 1 5W-30 (standard) in the 03 LX (145,000 +/- miles), and
for whatever reason, M1 High-Mileage 10W-30 in the 00 LC (170,000 +/- miles)

Prolly should be using M1 High-Mileage in all of them. Can't remember your mileage, but I'd prolly use 10W-30 HM in it.

 

[wct49]

For the people running syn in your hundo are you running 10w30 or 0w30? I am going to use Mobil 1 but don't know which to run. Leaning towards to 10 just do to the heat and it being a DD.

I vote10w30

 

[Bomar]

Thanks I was leaning 10W30 btw CT I am putting the Napa brake pads you stated on the rear of the hundo tonight..

Thanks for all the info gents.

 

[ntsaint]

Finally got my 90k done...at 112k.

T Belt, tensioners, and pulleys
Serpentine Belt, tensioner and pulleys
Water Pump
Thermostat

Dealership did all the above for $500, which i didn't think was too bad.

They also changed the diff fluids and t-case fluids for another $130. Also had them grease up the driveline and loosen that stuck differential bolt.

I'm putting on new brake pads and changing the oil this weekend, which should get me ready to make the trip out to CO first of August.

 

[Kaderabek]

$500? Seriously? Was it a Trabant dealership?

 

[ntsaint]

I should clarify, that's $500 labor.

Parts came from CDAN, which were about $400 i think. Total of $900.

And I had to google 'Trabant'

 

[G-Cat]

And I had to google 'Trabant'

I, too, had to Google Trabant. The 1975 model is one of The 50 Worst Cars of All Time.

 

[Kaderabek]

Yeah but you got the volume discount on parts and labor. And never had to pay for parking or gas.

TJK

 

[wct49]

And I had to google 'Trabant'

nice legs.

 

[2000UZJ]

nice legs.

They didn't take the tires off when the spray painted the rims...

But yes, nice legs

 

[Bomar]

https://forum.ih8mud.com/uzj100-lx470/748756-locked-armored-lifted-1998-100-series.html

Nice truck for the price. Nothing needed

 

[Bomar]

http://shoals.craigslist.org/pts/3908989677.html

100 parts truck

 

[NOLAKS]

http://shoals.craigslist.org/pts/3908989677.html

100 parts truck

would love to bolt a 45 body on that

 

[77TLCFJ40]

Looking for an OEM tool kit for a 2005 100. Anybody have an extra?

Thanks

 

[Redcrayon]

I would like a factory toolkit as well if you find a source.

 

[SHUSH]

My old truck on 35s. It's at ACC now waiting on a pallet from Slee.

 

[ntsaint]

Miss it don't you?

Sent from my iPhone using IH8MUD, and hopefully approved by the NSA.

 

[Bomar]

My old truck on 35s. It's at ACC now waiting on a pallet from Slee.

Right size too....285.75.18