As title, bought a 100 series style fusible link. Looking at swapping it over. I've seen it done (On here) but just after some advice on a easy install method to wire it in. Cheers
100 Series fusible link upgrade. 1hdft 80 Series (17 Viewers)
- Thread starter JACOBnzl
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
Ended up figuring it out. Pretty simple. Will get another for passenger side and re do the accessory's
For future people looking to do the swap/upgrade. Basically the fuses you can see are the same amp as the original fusible link wire. So cut the double grey plug off and crimped eye terminals and the main fusible link just unbolted from junction box. Simple as took 15 minutes. Cost $56nzd for the 100 series fusible link block. $30 odd on bolts, fusible link fuses and a pack of eye terminals
For future people looking to do the swap/upgrade. Basically the fuses you can see are the same amp as the original fusible link wire. So cut the double grey plug off and crimped eye terminals and the main fusible link just unbolted from junction box. Simple as took 15 minutes. Cost $56nzd for the 100 series fusible link block. $30 odd on bolts, fusible link fuses and a pack of eye terminals
That may be the most elegant solution I've seen to get rid of the OEM wire link. Not that the original solution doesn't work, but it always seems a little delicate and exposed for something that can so easily disable your rig. I like the idea of fuses in a fuse box, and I also like the idea of using a Toyota part.
