ARCHIVE 100 Series Antenna/Flag Mount Group Buy.

[jonharis]

For me, I need/want to run a second antenna.

 

[PhrogsPhorever]

Exactly

Sent from my iPhone using IH8MUD

 

[KlausVanWinkle]

If you're only going to run one antenna, the drivers side seems better. You can keep an eye on it from the side view mirror. It still hits its fair share of branches but as long as you have a spring mount, It works great.

 

[Anthony.L]

Driver and passender side mounts, one for CB and one for 2M/440.

 

[SupraTuRD]

Please put me down for a black one for the driver's side. Thanks!

 

[Layonnn]

Very nice product and design Shane! If i didn't have my CB antenna on the ARB i would buy this in a heartbeat.

 

[culpeper]

I'd like a SS version please...

 

[AATLAS1X]

Thanks to Paul's knowledge of SW over the lack of mine, we now will have a RH version.


Post up if you want in on the group buy..

RH or LF- Stainless or powder......

 

[schow]

Do we need to re-post our order? Please count me in for a black powder coated driver side mount.
Thanks!

 

[AATLAS1X]

Do we need to re-post our order? Please count me in for a black powder coated driver side mount.
Thanks!

Just need to know what you want as I added the RH side to the group buy as some wanted the RH and both.

 

[FullyLitLED]

One left and one right pls, let us know when the code will be ready

 

[Anthony.L]

LEFT and RIGHT!!!

 

[ntsaint]

Drivers side powder coated.

Sent from my iPhone using IH8MUD

 

[anthonycds]

Gotta have one. Passenger side, black pls.

Thanks,
Tony

 

[SanDiegoCruiser]

For those who are getting powder coated, the antenna needs to be grounded. The way this usually works is the bracket attaches to the mounting screws and creates a ground with the vehicle. If the bracket is powder coated, then the bolts won't have a good ground to the bracket (unless you scrape some of it off...) I had the same issue with my slee rear bumper. I had to scrape off the power coat on the bottom of the antenna mount to get a good ground.

This is the reason why I want a Stainless Passenger side mount!. Thanks Shane.

 

[Anthony.L]

Yup, and hence why I pushed Shane to offer the SS option early on. I'm not interested in paying for a coating to just them sand it off, give me bare metal!

 

[KlausVanWinkle]

Black Driver's side and PS, please.

 

[schow]

With SanDiegoCruiser's comment, I am not thinking if I should switch over!? Will adding a lock washer do the trick?

 

[KlausVanWinkle]

With SanDiegoCruiser's comment, I am not thinking if I should switch over!? Will adding a lock washer do the trick?

No. But it's not that big of a deal. Just use some sand paper around the antenna hole. and the holes for the bolts. You have to do the same thing when creating a new ground for a dual battery or any electric accessory.

Having the rest of the mount powder coated will look nice and be more durable.

 

[AATLAS1X]

No. But it's not that big of a deal. Just use some sand paper around the antenna hole. and the holes for the bolts. You have to do the same thing when creating a new ground for a dual battery or any electric accessory.

Having the rest of the mount powder coated will look nice and be more durable.

This is my thought.

I want the black mount, but will clean up the mounting faces when it comes time.