lift

I may need to look for an installer in the area to put my lift on and do alignment. Anyone in the area you recommend? I'll have all the parts so just need an installer. Going Bilstein 5100 front and rear. Toytec/Eibach 620 Springs in front and Toytec Superflex springs in rear. I will probably...

See New Posting!!! Well. I never wanted to sell this, but I am going to have to do it. $7500.00 is the Price. I would prefer to be reached via text at 405-229-006Eight She has 179,000 Miles on her. I am the 2nd owner, and it was originally a Texas vehicle. A/C blows very cold and heater...

Hi fellas - not my rig. Saw this in a parking lot and had just a short chat with the owner and I asked his permission to take a couple of pictures and post it here. I'm a 100 and 200 series owner and I'm not very familiar with the GX, especially mods for them but I thought some of you folks...

My lift gate is rusting through just below the window, so I've picked up a donor off of a '91 with the same color. I'll keep all components and wiring harness and replace it in the donor lift gate. I removed the lift gate with no problem from the donor truck. However, I have a problem getting...

Bottom line, Im in the USAF stationed in Okinawa, Japan. I have an APO address here on base, or friends that live on the economy with local Japanese addresses. Are there any vendors that can ship internationally for either an OME or Terrain Tamer suspension kit for a '92 HZJ73? Thanks in advance!

I saw this lift kit for sale locally: Fj cruiser used lift kit. The guy bought the FJ with it installed and had it removed to put a different kit on- doesn't know how many miles are on it. Is there a way to check how "worn" the shocks and springs are? Does the FJ use the same springs as the GX...

I bought my fj used a couple of year back and I'm trying to figure out what lift it is. The components are OME The front: Driver side has N 73L shock, unknown spring. I thought it said 850 or 851 The diameter of the the coil is about .686 thousandths I'm counting 10 wraps. maybe 9.9 ( I was...

Anyone running this lift? Is it level, do I need spacers for the front and are there any driveline issues? Thanks

Hey everyone! I am a newbie and look forward to learning from y'all. Just bought a 2011 LC, I am pumped!! Unfortunately it came with street tires. I have the T/A KO2 on my 4runner and I love them. Forgive a stupid question, can I mount some T/A KO2 285/60R 18s on the stock rims without lifting...

1997 Land Cruiser I just installed the 3-inch HD OME lift. Looks great and feels smooth but I have a grinding sound/vibration at high speeds (65mph+) and especially audible when I release the gas from high speeds. I initially thought driveline angle issue after lifting it but would a 3-inch...

Went to pick it up and the new OME 2.5 lift and its leaning toward the driver side. Its too much to ignore. He said the A and B springs are fitted correctly. Any things you guys have done to straighten it up?

Want to see some tire rim and lift setups. Have to decide which setup I want to go with. Also if you rub in turning full lock or in extreeme compression please say it. just got a 2002 Lc with nav 162k miles. Thinking of a old emu kit with slee diff drop and spc control arms(slee's kit) med weight

EDITED: I feel like the answer is right under my nose, but I am not seeing it......why do caster plates seem to be designed for +4 inch lifts but not smaller? This crossed my mind after reading a couple recent threads about caster bushings falling apart and the thought that OEM bushings have...

When I was working on my old Jeep, the Bendpak would raise it enough to work under, and I could still use conventional jack stands as a safety back up (the lift has a mechanical lock). I find that for good clearance on this truck, I have to raise it higher than the jacks will reach. Bendpak...

Hi, Guys! Sorry if this has been answered before, and I've looked through and contacted a couple listed shops from the site, but wanted to ask as I've received a couple quotes I thought were too high. I've got 100 series Land Cruiser. I have a rack and pinion sitting in my house that needs to...

I'm contemplating about adding a rear metal bumper with tire carrier. I'm currently using ome 861/862 stock height replacement springs with MAF 30mm spacers. Future plans will include a slee shortbus, winch, and dual batteries which will lower the front a little. OmE 861 is a heavy spring, so...

PO installed an OME Light Duty (seven leaf) kit which I think is supposed to be a 2" lift. Sorting through the paperwork there is an invoice from a spring shop that recurved the springs. Shocks are now pro comp instead of the OMEs. I'm trying to determine how much actual lift I have over...

Last weekend, I was sitting on the back of the gx and the rear was lowering on me. I suspected the airbags were going out. The truck also leaned to the right, which lead me to believe I had a shock out also. The air system continued to work while driving so it was okay. Yesterday, my wife...

Anyone been running this--pro or standard version--for a while, and what do you think? Planning to swap out an older OME stock-height for something that can take more weight but also ride well when light. (Well, as light as these get...) So, adjustable like TT Pro or add air shocks... Thanks!

Hey guys I'm.looking for an OME lift kit for my 77 FJ45. I'm.in Edmonton Alberta Canada. If you have one or know of one.... Please let me know thanks....Neil.