intake manifold

  1. Ry24000

    Wanted  17111-61010 intake manifold

    I could use an intake manifold. Early 2F. Not repaired. Shipping to 98610 Washington. Thanks
  2. K

    Torque specs intake manifold and coolant crossover

    Hey all, been trolling the forums looking for torque specs for the intake manifold, starter, and rear coolant crossover pipe (the one that goes to the heater T). Also need torque specs for water temp sensor. Here’s what I’ve found so far and what I’m still looking for. Any help would be...
    • kravman4
    • Thread
    • coolant crossover pipe intake manifold intake manifold torque starter starter torque
    • Replies: 5
    • Forum: 100-Series Cruisers
  3. Atticus1414

    Welder Recommendation

    Hey All, This a cross-post from the ATX clubhouse so giving a heads up in the event you read/replied there first. This is my first time posting in this clubhouse section but have been active on Mud on and off for over a decade. Developed crack in my intake manifold ('75 2F) in the plenum under...
  4. Atticus1414

    Welder Recommendations

    Hey All, First time posting in the clubhouse section but have been active on Mud on and off for over a decade. Developed crack in my intake manifold ('75 2F) in the plenum under the riser. Any recommendations on local shops skilled enough to TIG weld a few beads in the aluminum to seal up...
  5. Clubtroy

    For Sale  Houston, TX: '74 1.5F complete engine or parts

    Howdy MUDers, NOW SELLING FOR PARTS OR $400 FOR COMPLETE ENGINE? Let me know what you need The intake manifold is in perfect condition. No cracks. Appears to be identical to a 2F but I am sure experts will chime in. Definitely mounts up to the bolt pattern on a 2F I have.
  6. jbee

    Can I remove these head bolts? Intake manifold gasket questions.

    Photos attached. 4/72 fj40. Stock as a rock. Rebuilt carb going on so I’m fixing vacuum leaks. Can I remove these 2 head bolts and then put them back in /torque without causing any trouble? I need more access to replace the manifold studs. I guess I could re-torque all the head bolts per the...
  7. D

    FJ62 Vacuum Clogs in the bundle of lines under intake manifold.

    I am cleaning and putting together my intake manifold with a bunch of parts I scavenged. A few vacuum lines in the metal bundle under the intake manifold are clogged. Any one have an idea how to get these cleared?
  8. Beehanger

    Dear mother of God. Top of intake manifold not flat.

    Gentlemen, I’m noticing post engine rebuild and reinstall I’ve got myself in a big pickle right when I thought I was at the finish line. ! I’m beyond my scope on knowing how to protect fix this one and seems like I have one shot at it. The Intake manifolds carb surface isn’t flat. I took a wire...
  9. johnnyshaner

    2f intake manifold: how bad is too bad?

    I'm doing the 3fe exhaust mod and I'm not sure my existing intake manifold is going to work out. It's not cracked, but you can see the eroded aluminum. Is this okay? I'm not looking for a ported intake, but will this be a future problem? As I guessed it's not completely flat. It's off by 0.020.
  10. D

    Wanted  Wanted: PDI or Krae 4x4 intake manifold adapter/intercooler pipe

    Bought a semi-local PDI intercooler kit for HDFT to adapt to my 1hdt, and they are exactly the same aside from one pipe and the manifold adapter. I need the intake manifold adapter, as well as the straight/45* pipe that runs along the valve cover on my HDT. The pieces I need I have circled in...
  11. Eurasiaoverland

    Wanted  14B-T intake manifold air intake and crossover

    Looking for an air intake for a 14B-T intake manifold (not the manifold itself). Can be posted to Houston, TX. Addresses in Australia and Europe also available.
  12. G

    Unknown Wires/Plugs under intake manifold

    I was replacing hoses under the intake manifold and saw this wire cluster that plugs into a Blue & Red "sensor/relay" and then into a white plug. This cluster also appears to run down the block a few feet and plugs in again there. My question is, what is this plug/wire assembly called(part# if...
    • Gergg
    • Thread
    • intake intake manifold manifold sensor wire cluster
    • Replies: 8
    • Forum: 80-Series Tech
  13. fj40cm1980

    Rust around carb base and air intake manifold rail

    Hi all, I'm about to rebuild my original carb in my 1980 and I've got a lot of rust going on around the base and along the block/manifold. Any ideas on what could cause this type of corrosion and how to avoid that in the future? My air intake manifold rail had 3 out of the 5 fittings...
  14. SAH

    For Sale  Atlanta: FJ60 2F Intake Manifold

    $150 plus shipping
  15. bloc

    Intake manifold removal trick

    Over the years I've seen a number of posts from people talking about difficulty getting the intake manifold off due to some harness retainers on the back of it. I had my manifold off yesterday to replace the foam blocks and figured I'd get some pictures of the issue to help people prepare. If...
  16. vbvagearhead

    SOLD  Virginia Beach-Miscellaneous smog parts

    I recently removed everything smog related off of my 87 FJ60. I currently have all smog components and they are in working condition. My truck ran like it should. All components have 168k miles. The manifolds have cracks in them so I'll hang onto them but everything else available. I have an air...
  17. nitroid13

    Wanted  75-80 2f intake manifold

    Exactly what the title says. Looking for one that's not cracked inside. Preferably non egr
  18. yotanut

    SOLD  Tucson Az 2F intake manifold from 76 Fj40

    I have a nice straight 2F intake manifold from a 76 FJ40 for sale. In Tucson AZ $125
  19. chelo

    Wanted  Looking for a late fj60 intake manifold.

    Looking for a late fj60 intake manifold. Going to the 3fe exhaust manifold route and don't want to take apart original manifold. If it has an egr that's a plus.
  20. C

    What does this go to on the Intake Manifold?

    I am unsure as to what this goes to off of the intake manifold
Back
Top Bottom