I have a pretty good leak going on under the glove box when the ac is run. i recently removed all of the carpet and rhino-lined the interior b/c the carpet was molded and smelled like :censor:
drove 4 hours back up to school and watched as a pool formed in the side sill of the passenger...
I've done my research and there seems to be plenty of interest on this but not much actual experience. Beno and Ammo have some good examples out there.
Sooo, its come time to rip out the moldy, mildewed, grimey carpet. I've decided to line it and am going to roll rather than spray for $$...
Im looking to add some front spring spacers to level the beast out, ive put it off long enough and with a front bumper on the horizon it will only become more of an issue. I searched and looked at a number of spacers and feel more comfortable with an aluminum and more permanant spacer like the...
Alright so my dads 77 fj40 seems to be running great since we got the carburator tuned/jetted. the stock carb was a high altitude carb n we live in south florida. The only issue we face now is that upon a hot start the cruiser stalls out when making hard left turns, not formula 1 hard but...
driving around the other day and look at the thermostat and its pegged all the way right:eek: . pull over seems fine get home and let it sit. the next day dad drives it and comes back home a few mins later to swap cars cuz the needle was pegged right again. anyway after checking it out the...
about a year ago my passenger seat would go forward but not back so pulled it out and set it as far back as itd go and put it back in with the electrical disconnected. then a few months later i found the little plastic cap had fallen out on the driver side and then had the same problem witht he...
I drove home from gainesville to boca raton(270 miles) last weekend and took a look under the car and noticed the rearmost of the 2 bolts on my passenger side lower control arm was missing. the bolt must have loosened up and fell out since i had my bushings pressed and installed. before i...
i was doing some searching on extending the bump stops to accomodate my j springs and i came across someone saying that you need to extend the differential breathers as well otherwise they will pull off in extreme articulation situations leaving you with diff oil everywhere. is this the case...
saw this 80 getting some love on freeride surf shop's webpage. this anybody's rig? i see an arb some sliders and a rack looks nice
http://www.freeridesurfshop.com/
walked out to my car tonight and someone hit me on the driverside rear :mad: . they tore the mudflap down off of the mounts and scuffed the fender flare. the fender flare moved about a half inch forward in the rear and where it meets the rear door it is popped up off the body about 2 inches...
I installed my cdl switch from slee and completed cdan's pin7 mod. now when i select low neither the abs lights nor the cdl light comes on good right? or are the abs lights still supposed to come on? Also when in high and i press the cdl switch no lights come on yet i can hear the actuator...
Help with sick cruiser
So im on vacation in martha's vineyard and my cruiser decides to play some games with me. Not the right place for something to go wrong. I go to start it on my lunch break and it doesnt start. Sounds like its trying to start but just wont turn over. I jump it and add...
OME J springs are installed along with new rotors and pads, 100 pads up front love them i definately noticed a difference in braking, but i am comparing to worn pads on worn rotors. J springs with long shocks sway bar drops and ss brake lines all set for the summer. i love the amount of lift i...
Amidst my failures today i did happen to install my cdl switch and do the pin7 mod, yet this was amidst my failures. after installing the cdl switch the indicator ligths would not light up and cdl would not lock, i checked the switch again and again and seemed to be connected fine so i checked...
so i was jacking the truck up today in the garage to prepare for the installation of my j springs and brakes and after placing jack stands in place and lowering the axle and removing tire i realized i only had 9 inches from rotor to ground as slee recomends 12 inorder to get the spring out, so...
Just recieved my ome suspension today, im planning on putting in the suspension and replacing rotors and pads this weekend. I live in boca raton, anyone local interested in coaching/training/instructing a newbie on the install? pm me thanks in advance
im expecting allot of these :flipoff2: ;p
allright so im awaiting a boatload of parts to come in throughout the next two weeks. im moving on up from a stock rig with 285 at/s to a J sprung rig on 285 at/s. awaiting slee lighting harness, cdl switch, j spring lift kit, and brakes to be in monday
as im awaiting my brakes (front and...
http://www.turbonator.com/index.html
claims 35hp and 31% better gas milaege, does anyone have any info about this product, ever used it or know any one who has. is this a load of crap? says you can use up to three of them and it fits any stock intake. up to 35 hp gain and 31% better gas...
Is there any difference between the stainless steel brake lines sold on Man A Fre and the ones sold by Slee. Slee says they are 4 in longer than stock and man a fre says 3 in. are they the same lines with different quoted lengths or different lines all toghether