Currently intalling these sliders on my 1993 FZJ80. Was able to get the passenger side on pretty easy with all the tips on this thread. I have a question regarding the brake lines. The kit came with 2 bolts and spacers for the brake lines but I see at least 3 potental brake line bolts to...
Loosen the nuts holding the switch (see picture). That should give you enough wiggle room to take out the cushion. My cushion fell right off but I've heard of people using a flathead screwdriver to pop it out. Then it's a matter of blindly trying to place the nipple in the hole then pulling it...
Installing new suspension on an '88 FJ62 and noticed both rear sway bar brackets (that connect to the frame) each have a broken bolt (see picture). I tried removing bolts but they are on there pretty tight; so much so that I think the bolts might be welded to the bracket. Can anyone answer if...
by under the dash does it sound like it's coming from the passenger side? From my understanding, the two relays on an FJ62 that have to do with starting are the circuit opening relay and the EFI relay. The circuit opening relay is in the passenger side front kick panel and the EFI relay is...
I had a similar issue last year. Found out my EFI relay clicked but didn't pass enough current to start the truck. If you have a multimeter I suggest you test it just in case to fully confirm the relay is still good.
This is awesome info! Really appreciate you taking the measurements and pictures. I might be able to squeeze in with 31s or 33s and no lift.
In regards to my garage measurements:
Ceiling - 84"
Garage opening - 82"
Thanks again for all the feedback everyone.