Anyone out there have the desire to trade a 4plus winch bumper for a ARB FJ60/62 front bumper? I’m in Tacoma WA… It’s a long shot but I am going for a different look… mines used but in good shape, no dings!!
Anyone here run the Fifteen52 17" Analogs on their FJ62? I am looking at their 17" wheel but am not sure if I will need to run spacers when I mount them... Also does anyone have the measurement of this inside width? (See Picture Below). I am going to fabricate something to mount OEM 40 hubcaps...
So I decided to take on the project of installing a transmission cooler in my FJ62 and had to jump between 3 threads to get the right information. So here is it all in one.
Things you will need:
Hayden 1678 Transmission cooler (Bought mine from eBay or Amazon)
10 ft of 3/8 Inner Diameter Tranny...
So here's the way I did the Rodney flush. In the procedure, he writes (which I will post below), he says to take off the front driveshaft to gain easier access to the transmission hardline fittings. However, when I did the flush, all I did was disconnect the tranny hose from the passanger side...
Below I will show the speakers I used and how I installed them. I wanted to use the factory door card grills to keep the stock look while getting a better sound than the speakers that were in the rig. I bought these speakers from Amazon for 50$. I stuck to the 5.25" speakers as I don't want to...
Hello All,
Before I take it into a shop, I wanted to get others opinions... My passenger rear speaker when music is playing plays with very little volume, while all the other speakers in the car play at normal volume. First I checked all the wiring and connectors and to my visual checking...
Hello All,
Does anyone have a tradesman Roof Rack located near Washington? I saw one today and really like the look!! Pics courtesy of 033landcruiser on Instagram. Thanks!
Cade
Looking for a set of Cibie Round Amber Fogs, preferably the Oscar Plus... I haven't been able to track any down in the past couple weeks. Would like to mount them to my new bumper. Also if anyone has a Fog light Switch too that would be greatly appreciated.
Thanks!
Cade
I’m trying to find an Old-Style Arb front bumper for my 62. I’m in the Seattle area. I’m trying to stay between 250-400$ if that’s possible. Please Let me know what you have, I don’t mind traveling for the right price/bumper.
-C
About a year back I was in need of a headlight Bezel Gasket for my Fj62 as the old one was cracked and half of it was missing. Toyota does not make a replacement whatsoever, neither do any popular cruiser parts suppliers. A solution and suggestion I used by other people was to use Bushwacker...
I dont have a ton of pictures but for everyone that doesn't have a FSM this should help you...
You DO NOT have to discharge the refrigerant or mess with the AC Condensor!!!!
Here are some things I would remove before you even start looking at the radiator:
Remove:
1) Lower Skid Plate in front...
Well this will be my first build thread here on mud and my first Land Cruiser. After lots of research and time on Facebook, Mud, and Craigslist I finally found the 62 I had been looking for. Been garaged in Alaska for the past 26 years, kind of neglected with 98,00 miles. It was previously a...
Hello 55 owners, I am trying to find a roof rack for my FJ62 and really like the old OEM FJ55 racks. Any one have one for sale or that they might part with? Would one fit? Based on my measurements it’s quite possible but I’m not sure. Thanks!!
I heard a very loud clicking or ticking noise from the engine bay of my 62 and tried pinpointing the sound but couldn't, so I took it by the local dealer and had them take a look at it. They told me it was a leak from the manifold gasket. :doh:
If I plan to replace this gasket (and intake as...
I am trying to find a left brake light gasket for a FJ62 part #
81562-90A00
I am located in WA but will pay for shipping if someone has one. Hoping to find NOS or a repro but seems nobody has one as they are all discontinued... would possibly consider used but want it to be in good shape.
Thanks!!
Last night I attempted to adjust the TPS on my 89 FJ62 while leaving on the throttle body. Turned out to be a bit of a tough adjustment so I decided to remove the whole throttle body. Im glad I did because when I removed it I have a lot of gunk on the butterfly valve which I will clean up with...
Hello All,
So I am still looking for a 62, just now only want to spend around 10K. My budget was 12 but need to put some cash away in case of repairs on the vehicle. Hoping to find one on the western half of the US so shipping or me driving it up won't cost me a ton of money :) I know 10 isn't...
Hello All,
So I am considering buying my first land cruiser and want to go with a FJ62... I have decided that I want to find a 62 because of the fuel injection, auto tranny, (ideally would prefer manual but this will be my DD), 4x4 abilities, and slightly beefed up frame than the 60. So I have...
Hello I am looking for a FJ62 in good shape little to no rust and in good condition. I have a budget so nothing too expensive.
My budget is between 10-12K. The car doesn’t have to be perfect but in good shape as it would be my daily driver. I have checked the local Craigslist postings in...