Search results for query: *

  • Users: stlcruiser
  • Content: Threads
  • Order by date

Forum search Google search

  1. S

    No High Beams

    Greetings: Looking for some guidance. When I activate the high beams either by pushing the stalk or pulling the stalk, I will get the dash light indicating that the high beams are on. However, they are not on and I am not getting voltage at the bulb socket. Since the dash light comes on, can...
  2. S

    Rear suspension linkage bushing?

    Greetings: I have been hearing some rattling coming from the rear somewhere. When I got underneath, I noticed there is about 3/8" play in the linkage in the picture I have attached. My question for my own knowledge is what is this linkage called, and should there be play in it or should there...
  3. S

    Wanted  Left Hand Interior Door Opening Assembly (Oak)

    Spring broke on my 1994 Drivers Side front door assembly. It is the same part for the rear door also. Will fit years 1991-1994 80 series. Need the brown (sable) color. Thanks, Steve 94'
  4. S

    Don't ignore a dry spindle bushing!

    Greetings: Been having the common symptons of a dry spindle bushing. Intermitant high pitched grinding coming from front end. Would last anywhere from a couple of seconds to up to 10 seconds. Not associated with speed or driving conditions. As weeks went by, it would happen more often. In...
  5. S

    No start issue solved but not after tow to the dealer

    Greetings: Had a "no start" issue after I left a light on and drained the battery. Tried to jump it with a battery that was not up to the task. Ended up charging the battery overnight, went to start it the next morning and no start. The starter would engage and crank the engine, but it...
  6. S

    Crankshaft keyway

    Greetings: I'm buttoning up the crankshaft oil seal replacement and oil punp cover gasket. The crankshaft pulley came off with no problem. Just slid off leaving the key on the crankshaft. I have been at it trying to line up the keyway to the pulley for reassembly but cannot get it on. I...
  7. S

    EGR Pipe

    Greetings: Have been running without the EGR valve for some time. I made a blocking plate for the intake and capped the exposed pipe near the firewall. I assume due to vibration, the pipe gave way and broke about 10" from the end. Now, I need to remove it where it bolts to the engine and...
  8. S

    EGR Removal

    Greetings: I have been running for some time with my EGR disabled. Now I want to remove the components completely. I have reviewd all previous threads about EGR removal and blocking off unused ports. I understand a blockoff plate to the intake is in order. However, the EGR pipe seems...
  9. S

    Let it snow

    Greetings: I was tired of paying to have ours and our tennants lot plowed. I looked at used "beater" pickups and used plows. You get what you pay for, plus you have liscencing fees, property taxes, insurance, and maintenance as ongoing expenses. So I decided to have a rebuilt Western...
  10. S

    Flat Nasty 7/5

    Has been a while since I've been out on any type of trail. So Larry and I arranged to run Hill & Gully with Ron, the owner of the park, as the trail guide. Gonna meet at the office at 10:00 a.m. Any one interested in some mild wheelin is welcome. Steve 94' FZJ 80
  11. S

    Transmission question

    Greetings: I have noticed that when I put her in drive immediately after starting the engine, I apply gas to the pedal, the engine will rev but the truck will crawl away from stopped position. Once moving it will eventually act normally within a few hundred feet. However, if I start the...
  12. S

    RTH Front Caliper Pistons

    Greetings: Winding up an axel service this weekend. I installed new rotors and have the calipers mounted. I was able to retract the pistons on both outboard sides and have fitted the OEM pads. My problem is that I am not able to retract the inboard pistons enough to fit the pads. I'm...
  13. S

    OME Springs for 80 series 861's, 862's

    Greetings: I just swapped out my "stock height" series OME's (861 front, 862 rears) for the medium lift. These springs are in great shape with about 40,000 miles on them and only 2 easy afternoon wheeling trips. $45/spring ($180 total) plus actual ups shipping charges from St. Louis, MO...
  14. S

    Advise needed after the fact

    Greetings: One of our work trucks, (14 foot box truck, Izuzu) got stuck yesterday. It was off pavement rear wheels in the mud about 4 inches with front of the rear tires touching concrete. Front tires were on pavement. Get the picture. Before I got there, a F350 hooked up to it and it...
  15. S

    Valve Cover Gasket Quick Question

    Greetings: I'm replacing the valve cover gasket and have the throttle body and plug wires already removed. The spark plugs have been changed within the last 5,000 miles so I don't plan on replacing them. Do the plugs have to come out in order to remove and reinstall the valve cover? I...
  16. S

    lifting rig in a couple weeks

    Hey guys, Hope everyone had a good holiday. Need some input please. Presently I'm running the OME stock height replacement springs. (about a quarter inch lift from non worn out factory springs) and 30 mm (1-3/16") spring spacers. I've got the Slee front bumper, Warn M12000, and Hanna...
  17. S

    Winch cable fused?

    Greetings: Gathering information on my upcoming winch install in my Slee bumper. Its an M12000. On my long run between batteries, I am fused at the starting battery. I plan on having the winch power and ground going directly to the aux. battery. Should the positve cable going to the winch...
  18. S

    Cooling system presure test

    Greetings: I'm trying to track down a slow coolant leak/loss. I suspect radiator as I have seem some wetness collecting on the sheild under the radiator. I have a presure test kit. My question is how much presure do I put in the system for a proper test and is this the normal operating...
  19. S

    ABS

    Greetings: After disengaging the CDL, the CDL light goes out however the ABS light stays lit. Only after shut down and restart of the engine does it stay off. Is this nornal? And does it mean that I have no ABS between the time I disengage the CDL and restart the engine? Thanks...
  20. S

    Rear Pad Shims

    Greetings: Replaced rear pads last night. Drivers side had the anti-squeel shims on each pad, while the passenger side did not. Is this OK, or should I order the shims and reinstall. Presently, there is no noise and braking seems fine. Also, the "inboard" pad, on each caliper was worn...
Back
Top Bottom