well I was able to get together with a friend of mine down in Richmond again for some more welding work... Chris M was the one that did my rear swing arm on the GX ( following my wonderful design ideas ) LOL
This time we built and installed the Rear Bash Bar bumper from 80% Offroad. @mess331470 had already installed it onto his so he knew what was going on.
It was fairly straight forward and it was just get the prep done then laying everything out and just going step by step. The install basically takes 1 day and letting the paint dry overnight.
The kit is nice all the pipe comes pre-bent and also notched so the only real cuts is the bar ends need to be trimmed a bit back to the length you want to run them at.
This time we built and installed the Rear Bash Bar bumper from 80% Offroad. @mess331470 had already installed it onto his so he knew what was going on.
It was fairly straight forward and it was just get the prep done then laying everything out and just going step by step. The install basically takes 1 day and letting the paint dry overnight.
The kit is nice all the pipe comes pre-bent and also notched so the only real cuts is the bar ends need to be trimmed a bit back to the length you want to run them at.
GX Bash Bar DIY Kit
The Lexus Gx Bash Bar is made out of .120 wall 1.75" mild steel sourced from Temecula CA. There is 8 frame mounting points making this the strongest Gx bumper/bash bar in the game. We also offer a super high clearance hitch that sits on top of the bash bar for superior clearance with no snag...
80percentoffroad.com
Last edited: