200 Series tech and classifieds. (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I’ve got about 15,000 towing miles on mine. Drop it in 6th and never think about it. My bladder likes to pull over every 225 miles

9 hours today.

961788FA-A858-4878-AF21-E9C713D23543.jpeg
 
Wish I could have grabbed a shot of you in the mirror this morning. The odds of 2 200s pulling old iron in opposite directions north of Jackson MS...
 
Playing with all the buttons today.

20220618_120816.jpg


The technology in this truck is amazing.
 
Next weekends project
20220710_184006.jpg
 
Last edited:
Pro tip.

The M8 rivnuts they send are huge. Back down to normal size m8 rivnuts and your drill time will be cut by 1/2

I noticed that. I was looking at them next to the M8 nuts I have already and noticed they were YUGE. Thank you for that. I will definitely use a standard size.
 

These things are pimp. I got a set of the 70 series for my 60 and saw they had 200 ones.

7C9DFBA5-A315-415D-A69C-C283B3ED46B4.jpeg


85E745EF-73EE-4F77-90E5-084C34E82AAC.jpeg


FFC2F59A-13FD-41B0-BB13-79EFE4B02CDB.jpeg
 
Good grief.
 

These things are pimp. I got a set of the 70 series for my 60 and saw they had 200 ones.

View attachment 3103653

View attachment 3103654

View attachment 3103655

Very nice addition. Put a set in the BJ70 before the Blue Ridge Parkway/Skyline Drive trip in July and appreciated them every day of the trip, plus every day since.
 
Going to do a test run on towing the WP with the 570 ahead of our trip to Crawl. The WP is a little thicker than a regular pig, but as long as it seems to pull solid, any reason why I wouldn't be able to aim west and let'er eat?
 
Well came home from work and found this ridiculousness...
20220930_173652.jpg


Not 100% sure, but since it was parked most of the day, feel like somebody backed over it during homecoming festivities today...

20220930_173916.jpg


20220930_173923.jpg


It hooked it and bent the sh!t out of the bumper cover. Erin didn't even notice it til I brought her out and showed her.

I got sh!t to do and a Crawl to attend, I don't have time for body shop next week.

Pulled the tire, pulled the fender liner down, straightened this little guy out, then with a little heat on the plastic and some patience, I worked it back around.

20220930_190402.jpg


It's definitely a 15'-20' job, but it'll get us to crawl and back.

20220930_193048.jpg


20220930_193041.jpg


20220930_193155.jpg


I was able to get all the holes lined back up and get the liner back in. Everything still works, no lights on.

The fitment around the headlight is fubar, but she'll ride for a week.
 

Users who are viewing this thread

Back
Top Bottom