I’ve got about 15,000 towing miles on mine. Drop it in 6th and never think about it. My bladder likes to pull over every 225 miles
9 hours today.
9 hours today.
200 Series tech and classifieds. (2 Viewers)
- Thread starter MEMCruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Wish I could have grabbed a shot of you in the mirror this morning. The odds of 2 200s pulling old iron in opposite directions north of Jackson MS...
Playing with all the buttons today.
The technology in this truck is amazing.
The technology in this truck is amazing.
Next weekends project
Last edited:
Pro tip.
The M8 rivnuts they send are huge. Back down to normal size m8 rivnuts and your drill time will be cut by 1/2
White 200s
I noticed that. I was looking at them next to the M8 nuts I have already and noticed they were YUGE. Thank you for that. I will definitely use a standard size.
Bomar
SILVER Star
We are getting out of a lot of the trim business.
So blowing out these LX570 body kits for 16+....
customvehicledesign.com
Holla all on the ground in Dallas.
So blowing out these LX570 body kits for 16+....
Lexus LX570 TRD Body Kit
customvehicledesign.com
Holla all on the ground in Dallas.
200/300 Series Armrest Black (Pair)
Comfort Where It Counts. Purpose built for the 200/300 series, this armrest delivers seamless integration with your factory interior. Whether you're navigating tough tracks or cruising open highways, it provides the support you need for long hauls. A polyurethane foam armrests to suit 200/300...
onestonearmrests.com
These things are pimp. I got a set of the 70 series for my 60 and saw they had 200 ones.
Good grief.
200/300 Series Armrest Black (Pair)
Comfort Where It Counts. Purpose built for the 200/300 series, this armrest delivers seamless integration with your factory interior. Whether you're navigating tough tracks or cruising open highways, it provides the support you need for long hauls. A polyurethane foam armrests to suit 200/300...onestonearmrests.com
These things are pimp. I got a set of the 70 series for my 60 and saw they had 200 ones.
View attachment 3103653
View attachment 3103654
View attachment 3103655
Very nice addition. Put a set in the BJ70 before the Blue Ridge Parkway/Skyline Drive trip in July and appreciated them every day of the trip, plus every day since.
Going to do a test run on towing the WP with the 570 ahead of our trip to Crawl. The WP is a little thicker than a regular pig, but as long as it seems to pull solid, any reason why I wouldn't be able to aim west and let'er eat?
Bomar
SILVER Star
ZERO....
I just have to remind myself I am towing but the gas gauge tells me more than throttle pedal.
I wish you could change the ass drop at 65 mph but only thing.
I just have to remind myself I am towing but the gas gauge tells me more than throttle pedal.
I wish you could change the ass drop at 65 mph but only thing.
I towed a built 60 with mine to Florida. 40s all the time.
I run mine in 6th exclusively when towing
I run mine in 6th exclusively when towing
Bomar
SILVER Star
I run in D on my 2015 and have towed through CO and UT and AZ with no issues and at well past speed limits with Karavan loaded.
Well came home from work and found this ridiculousness...
Not 100% sure, but since it was parked most of the day, feel like somebody backed over it during homecoming festivities today...
It hooked it and bent the sh!t out of the bumper cover. Erin didn't even notice it til I brought her out and showed her.
I got sh!t to do and a Crawl to attend, I don't have time for body shop next week.
Pulled the tire, pulled the fender liner down, straightened this little guy out, then with a little heat on the plastic and some patience, I worked it back around.
It's definitely a 15'-20' job, but it'll get us to crawl and back.
I was able to get all the holes lined back up and get the liner back in. Everything still works, no lights on.
The fitment around the headlight is fubar, but she'll ride for a week.
Not 100% sure, but since it was parked most of the day, feel like somebody backed over it during homecoming festivities today...
It hooked it and bent the sh!t out of the bumper cover. Erin didn't even notice it til I brought her out and showed her.
I got sh!t to do and a Crawl to attend, I don't have time for body shop next week.
Pulled the tire, pulled the fender liner down, straightened this little guy out, then with a little heat on the plastic and some patience, I worked it back around.
It's definitely a 15'-20' job, but it'll get us to crawl and back.
I was able to get all the holes lined back up and get the liner back in. Everything still works, no lights on.
The fitment around the headlight is fubar, but she'll ride for a week.
Bomar
SILVER Star
OEM bumper skin is not expensive.
That's good to know.
Bomar
SILVER Star
Wife wrecked hers not soon after we got it. Those headlights are stupid expensive.
But I think the skin as like $300.
But I think the skin as like $300.
