I know this has been covered to a degree elsewhere but wanted to see if I can squeeze anything more out of the brain trust. I bought an '03 LC. The previous owner had at some point replaced the windshield. It leaked and there was a fair amount of wind noise that seemed to be originating from the passenger side. The leak wasn't terrible but enough for me to have it fixed. I had it replaced by Safelite who also installed the two trim pieces down the side (attached with rivets). It was missing the rivets when I bought it. I bought the Toyota coated rivets but they did not arrive in time for me to have Safelite use them. I think they just used standard aluminum rivets instead. The trim pieces were not in the greatest of shape (slightly bent and don't sit PERFECTLY flush with the windshield/roofline where they meet.
Long story short, my leak is gone but the wind noise is still there. Any ideas? Should it be near-perfectly quiet or will there always be some wind noise - given the brickshapedness of the 100?
Long story short, my leak is gone but the wind noise is still there. Any ideas? Should it be near-perfectly quiet or will there always be some wind noise - given the brickshapedness of the 100?