im looking for a set of stock height springs for a 80 series
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
You should have no trouble making that trade...im looking for a set of stock height springs for a 80 series
yehh check and let me know
If you're interested in separating the maxtrax let me know.Selling a kitted out Gobi Stealth for a 60/62 series. $2,000 obo. Includes the following:
- Gobi Stealth, w/ wind fairing
- Gobi awning mounts
- Gobi axe/shovel mounts with locks
- ARB 2500 awning
- Four Maxtrax
- Maxtrax mounting pins
- All mounting hardware
Will not separate.If you're interested in separating the maxtrax let me know.
Hmmm.... Sweet. Got any other shots of this thing? Or a thread? Trace's username?Posting up for Trace. Trace is selling his legendary 60. The 60 famous for it's cattle guard front end. It once roamed the trails of Florida and the streets of Tampa for many years. It's been a while since he wheeled it or drove it, so probably just us old timers will remember it.
He is asking $2500, but confided with me he'd take $2,000 for it. It's a cheap way to get into a trail rig. It's a cheap way to get into a Land Cruiser period. Posting up here so maybe a Cruiserhead buys it before it ends up on Craiglist or Facbook.
The info he gave me that I'm forwarding:
------------------------------------------------------
It has an amazing 2F in it:
Bored out 40 over
Decked head 30
Decked block 10
I believe dome top pistons
Cam was sent to Crane and had the lift and duration lengthen. Torque was to be set from 900 to 1800 rpms if I am saying that right.
Chenoweth carb or carb kit
De-smogged perfectly
488 running gear, pumpkins were “perfectly” set by Michael
Power Trax Lock Right Lockers front and rear
Stock 4 sp Transmission
4” hockey puck body lift
2.5” Medium Old man Emu front shocks and springs
3” Heavy Old man Emu Rear shocks and springs
Custom roll cage built by the best friends a guy could ever wish for.
8” C channel solid steel rear bumper welded to frame w/multi - welded 2” receiver – 2 different hitches around her somewhere
Front Cage welded Boxed 1/8” steel plate wing bumper bolted to welded 1/8” plate boxed welded to frame
Old Warn 5721 winch – needs coil under hood to complete setup. I have line around here somewhere.
10” wagon wheels with roller 38” x 12.5” Super Swamper SX plus 2 unmounted used swamper 38” spares
Ford F350 dual horns with dashboard switch for that constant “hands free” get out the way sound.
Factory Gas tank still mounted, needs to be cleaned. Plus a clean 30 gallon F250 gas tank and a good 30 gallon racing fuel cell.
Body isn’t pretty, but let’s face it, neither is mine, ha.
There is probably more than I can remember.
She has been sitting a few years, but she will run strong, needs a battery.
I am asking $2500k obo for it.
Trace
----------------------------------
View attachment 1752765
View attachment 1752766