vipergrhd's latest activity

Update: Took it back and basically left the same. The shop is saying that their process is to scan theh vin and utilize whatever their machines tell them to use. I tried to explain the AHC settings, but they set it to high again. After driving it...

They are keeping the AHC in normal mode and aligning it to high parameters because when they scan my VIN, "That's what the system shows we have to do." This shop, it's a discount tire, won't work outside those stipulations. They won't change it...

Spam musubi!!!

Pro tip: Furikake between the spam and rice. This was the one we always got growing up, but Hawaii vs the rest of the US/World availability might be different.

If you don't mind sharing, what was your out the door price and which part number is it? I have a long list of needs, currently replacing the long block on my project 100.

Thanks! Just ordered a new radiator for the 100.

An off-center steering wheel is one of those little OCD things for me. If you have this problem, read on: 1) the following assumes you have a correct alignment and stock steering. If your truck is pulling to one side, wobbling, tramlining, or...

Much needed CV reboot at 317k. Not terrible, lessons were learned.

Drove out to where I park my other obsession. I think this might have something to do with my bank account balance.

Just finished renovating my garage after my new driveway was poured. Used my 100 to haul home the wall art for the newly renovated garage!

I would request for another reading at normal ride height, if readings are off they should redo it caster readings can be off specs. As long it's not causing any drift or pull. I would also recommend to have a full tank of fuel. If possible ask...

Post up your print out, not to worry about caster 1* split is acceptable unless you have a drift or a pull.

Definitely hitting up this party. I think I’ll be in a LX450 Limo coming from the Salt Flats with Rob and friends. If I bring my 55 can I drive up and park closer?

Why do you need a $4k suspension? I say baseline it and take care of the safety issues and just drive it till the wheels fall off.

Just a suggestion, buy or rent a leak down tester before you go crazy on a tear down if possible also find a borescope. You didn't say what were your readings, anything below 100 psi you are pretty much done. Leak down will just point out were...

Just a quick update: compression tests revealed super low compression on several cylinders. Not surprising, I know. I'm getting ready to start the teardown and look for any other damage.

Just a quick update: compression tests revealed super low compression on several cylinders. Not surprising, I know I'm getting ready to start the teardown and look for any other damage. I'm gonna pull the heads and check everything out first...

You can fit a elk in a 60 had to cut her off at the knees though

We had a little birthday celebration and I got some pretty awesome great gifts. :)

Depends on how "used" they are. You'll never wear out either. As long as they're not already worn out. If they've both been dealer maintained (I'd be shocked), get the 9k. If not, get the one that leaks least.

This isn't ebay. Throw me your best offer

@ onemanarmy, this place is 1,650 miles from our city, Buenos Aires. But the vehicles traveled by truck most of that. Overall, we drove about 2,000 Patagonian miles during seven days in Chile and Argentina through stunning scenery.

Wait,... so now we're collecting PICTURES of Coleman stuff?!?

Nothing too new in my Coleman collection as of late. I did score this near photo at a small town car shownlast week. The artist had a small table and primarily did old car and truck photos. This lantern shot was spied by my Mrs 😎