There might be reasons to go low offset for wheeling. Most only look at offset for its face value in how it affects stance and poke.
If you're primarily on-road, this would be a downgrade in how it degrades handling, cornering...
Sure, they fit. But the offset is non-starter in my mind for the compromises it brings. I'd encourage you to look at offset between +30 to +45.
Many new to the hobby don't appreciate the importance of good offsets, but the dynamic impacts are...
Good to hear of another solid tire option.
Sizes available seem to top out at OEM sized fitments. So for those looking for upsized or inch sized tires, this isn't your tire.
Is the other side misaligned too? If so it might just be a bent control arm. Seems weird you’d end up with a bent axle but no damage to anything else… the axle is pretty stout
Looking good. Just noticed, but what chase lights are you running in the hitch? I'm trying to install some BDs as it really has to be bright enough to see through heavy dust and silt.
Good looking truck. Congrats!
Personally, I hate wheels that stick out more than factory, and I similarly hate cheap, aftermarket wheels. The older I get, the more I appreciate quality, and somewhat subdued OEM components and designs.
Use the...
The other thing to note is tire quality can vary from batch to batch, sizes and weight rating can have different compounds, etc. So this goes back to my point not to rely on antecdotal statements from anyone, including me. On the flipside to...
Got the truck pretty well dialed in at this point. Just need to find more time to get her off pavement.
Recent mods include Slee sliders and full DBA brake upgrade with 2016+ equipment up front.
Took a snapshot at lunch just for you. Really hard to tell there's a body-lift going on especially in proportion to 35s. It's a big truck and the step out height is up there in AHC high. Glad to have a step slider. Ergonomics for usability...
Another aspect to consider, the moment/torque forcing marginal toe-out during hard braking. In a derivative/static scenario, the tire center being one of the pivot points further out from the braking friction, creates a non-trivial amount of...
From your description, it's very possible the axle housing has been bent. If you're lucky, it could be fine and the suspension links and or brackets have been tweaked. Particularly the panhard suspension link and brackets should be checked. I...
If anyone is inclined to do a body lift, it also lifts the tailgate by however much the body lift is, creating clearance for more swingout options.
I use my swingout differently than most here. The upper hatch might just be able to clear my...