Yep, sure is. Amazon actually has it on sale right now for cheaper than I bought it for.
LarryB's Starter Solenoid Heavy Duty Rebuild kit for Dodge Cummins Denso 89-2006 https://a.co/d/0yZIK1V
Starter solenoid had been acting up off and on for a few weeks and finally was at a point where I decided it was time. The starter for a 2h is a pretty common Denso design used in many applications, and figured out that the solenoid part of it...
Check your clamps on all your hoses. If you have the typical worm gear clamps, you can get cold water leaks over time. The hoses swell when they're hot so it seals everything, but they will shrink when cold and can develop a small leak...
Some vanity items for the day for @Kmonty66 build.
Color matched LS3 engine cover , Trail Tailor FJ62 console, custom extension with the 6 speed ratchet (tap up/down Lokar shifter) and twin sticks with TT matching knobs.
New carpet kit as...
Bit of an update on the Cruiser. Body undercarriage, inside and jams all painted. It's now back on the chassis ready to be blocked and painted. Let the sanding begin.
Well after assessing the rust in the roof and cutting a few section it was evident there was rust in the inner rails that would require significant work. Was able to source a new turret locally which will make the job easier and give a nice clean...
Beginning the body work. Replaced the right quarter panel which had been pushed in, was rusted and full of bog/bondo. Also gave me access to properly repair some rust on the inner wheel arch.
Proud day for me. My son and youngest of four signed with Colorado Mesa University for football and academics.
So proud of William. Hopefully he will take the Trail Tailor reigns in a few years.
Jason
The project car got a fridge as its centre console today. For Australian people this is the Jaycar Brass Monkey Centre Console Fridge. No doubt it comes out of a chinese factory and is sold around the world under a variety of names.
Here's a...
I opted to use the window gasket to mount the whole assembly. It fits quite well and seems sturdy. I might get a less powerful gas strut.
I'm super happy how it turned out.
I really love wiring, its fun, although I cant say I did this completely from scratch. I started with a cheap generic LS stand alone harness and went through it and modified it to be a much better product, Using an Eaton Bussmann RTMR for the...
you could easily convert them to USA type always ON running lights , parking lights , ON w/ headlights ..... operation
same as you see here below ...
you would hook them , BOTH positive B+ and neg N- to your front clear corner lamps...
Looks fantastic, making wiring harness' is so satisfying. I'm loving your wiper linkage too, I think I'll be doing this in my near future as well "while I'm in there" for rust repairs. Appreciate all the pictures and dialogue on doing them.
Finished up my wiper linkages with some paint and then greased them up and clipped them together using some 10mm circlips. Super happy with how they turned out.
On Friday I was able to machine my PCM mount, super happy with the fitment...
1. Year and model: 1989 HJ61
2. Owner: Chris F
3. 158k km
4. Mods: Stock, except for Old Man Emu shocks. No factory lockers :(
5. Uses: New to the group! Just purchased last week, planning to overhaul entire vehicle. Will be fixing rust and...