Outsane's latest activity

RTF property

vacuum pump sold only thing left are the timing cases

nice work! where was this?

Still hitting it hard 💪

The replacement brake pipe i used was rwgular 3/16 copper/nickel but the flare ends i used were metric (M10x1)

Back together somewhat and off to my friends house to finish the mechanical stuff.

Okay, not this weekend, but the last 4 plus years of weekends... I will put together a belated build thread on this with more details later. This has taken more than 4 years for me to get to this stage. I tore the rig apart the week of...

Overdue replacement of sparkplugs - got my money's worth out of them Did notice that there was a reasonable amount of oil that has leaked down the tubes, so will need to get new sparkplug tube seals and may as well also do the valve cover gasket...

Oh yeah! I've seen some crazy numbers by FTE's im just looking for enough power when I put my foot down, i feel like im actually accelerating, even at 5-7000 feet.

Look at that!

Getting rig ready for overland expo in Oregon this week. Due to fans not showing up in time had to put old radiator back in but added power steering coolers and removed ps fluid circuit from radiator. First drive home tonight and she’s plenty...

Ill buy the pipe and tube

Rig is on the lift for some upgrades so decided now was a good time to replace the radiator and a few other things. Get everything stripped off the front of the motor to figure out how to fit bigger radiator and maybe pusher fans between it...

putting together a bunch of lines for new power steering cooler and some of them are running through the front crossmember. don't like how they were rubbing on the corners of sheetmetal holes so printed up some snap together passthrough deals to...

Nice work

I have a free set of four sand stakes... Got a different system for my awning so want this to go to someone verse the trash. Hit me up...

Hell yes, we stand behind our products and no you are not the first or the last to break our stuff. If you wheel you have failures and yes even our stuff fails. Like all of our products it was first designed by me for my needs and I put in the...

Thanks for the 3D printed products Lee!

all bushings are new.

Also check all the bushings with a pry bar.

Hmm double check wheel bearings are tight. Part time kit also made the steering lighter on the freeway for me, nice on long drives.

Have you raised the rear panhard? Mine wandered a bunch until I got the panhard bracket from Delta.

Nice and clean install!

Posting this for the new people on the forum that may not be aware of the storage module 4x4 labs makes to replace the 3rd seat bracket over the wheel well. They are very stout and well made. On the other side, I’ve covered the holes from...

Got a second one 😂