Just finished up replacing my master cylinder and adding the Wilwood proportioning valve. Gravity bleed the master cylinder and vacuum bleed the brake lines. After bleeding the brakes I drove it around and the pedal was soft. So after adjusting...
Finally found a good solution for attaching Mountain Hatch tailgate cover more securely.
The vinyl "Christmas Tree" push rivets that come with the cover loosen up over time, especially with fluctuations in temperature. Replacing them is cheap...
Yes, the Taco is an integral part of my life and I would no sooner part with it than to give up my FJ40@! Gotta have something with air conditioning when you live in Arizona 🥵...
HOLY s***, CHECK OUT THIS DIESEL FUEL FILTER PLACEMENT... sorry excited this actually worked lol.
There are two capture nuts on the fender that line up perfectly, one is a little more offset than the other but it bolted down nice and tight, you...
We are GAINING. So, for others that come after me, do not install the transmission while it's in a gear.
back40 ships them in 4th, I left it in 4th. Two person job to get it out of 4th and into neutral, you wont be able to install the shifter...
We spent 4 days in the San Juan mountains, staying in Ouray and 1 night camping in Great Sand Dunes National Preserve. I drove Jackie out there and my son drove his Sequoia. My other son and his Fiancé flew in from Austin. It took 2 days to...
We out here just flat out winning. For something that should've taken me 45 minutes, it only took me 3 hours 🤣🤣.
nothing about this is professional or safe. But lets make it happen.
About there on the hood, ready for a thick coat of primer and block sanding to 400g.
These are the best doors I own so running them.
Best fenders I own too.
The rest of the body parts are stripped as well.
Cheers
Forgot to note it a couple of weeks ago, but I changed out the horns; upgraded to the same FIAMM 130db Low and High horns which are in my 2011 Avalon.
Now it sounds like a PROPER horn for this vehicle.
Really easy…half a 🍌 in difficulty; about...
Dave 4x4 got back to me! Stuff should be shipped September 2nd! It was pretty much all my fault, I didnt realize I had to approve parts via spreadsheet. Thats on me not paying attention during the emails back and forth
Rear main seal replaced...
Dreamed I put this beautiful stage 2 they had at the MWE in it.
Then slowly drove in the fat pig up the pile of rocks with a friend for a quick overnighter.