UPDATE:
I got the rotor off. I drilled a new hole and released the tension via the star adjuster.
Once I got the rotor off I could see that I had pulled the Shoe Hold Down Spring's pin through the retaining cup. This allowed the spring and...
Another day, another project.
Before I went on my last off road adventure, I took a peek at all the brakes, scuffed and and adjusted the shoes and drums, and made a mental note that there was a dark ring on the axle tube, left side rear...
It is a FF axle, I’ll give you that much. The axle under my 40 (the tire) is a six bolt FF axle from a 45. The axle leaning against my 40 is 8 bolt and it’s sealed by a reusable steel gasket.
@mmw68 I like those covers with TEQ on them & would consider them for my Hella 4k’s…BUT…. when I plug 8141 on the Hella site it only comes up with covers that say Hella. How’d you find those please.
Thanks
It's not just length/amps. The calculations depend on temperature.
I typically add 20% to any chart. I'm a big believer of oversized wiring, and correctly calculated fuses.