Dropped my skidplate. It's a lot easier coming down than going up, thing weighs about 100 pounds. I don't need it around town and it looks like I have some parking brake seals work to do. I'll just lean it up out of the way until the next...
GM Rally Wheels 15x8, BFG ko2s 33x10.50, On stock springs, Some work needs to be be done on the wheels, Center hole needs about 1/8 inch cut bigger and clips, only rubs on front a little when backing out drive way and turning,
Man that sucks, been there done that. At one point we all stood on front bumper to get it to clear after airing tires down and loading interior up with heavy crap.
Glad it worked out!
R-12 is 45° not 37° (AN) so good chance you are seeing that..
R134a is going to be O-ring and the Amazon has better pricing for hose kits..
I've bought this kit twice...
Not many people are dealing with Orion’s anymore, especially since you can build a split case and install the same low range gears without all the Orion issues of popping out of gear.
Not currently mounted but these are my original 55 rims that I just got powder coated and those are Kenda Klever 33x9.50 RT tires. I have the "common" 70 series OME lift on my 55 that @gonzopancho referenced which gives you about a 2" lift...
Just wanted to introduce my self to the Pig community. I have had a few land cruisers at this point and this one is by far my favorite so far! I started my next land cruiser adventure! with a 1971 fj55 with a 2f and 4 speed out of a 1976. Did...
Transmission and Adapter for sale, $1000 for all, willing to split and sell separate. Price negotiable, can help load. Came with a project FJ40, but looking to go another direction with the build.
Transmission is a 1990 700R4, bought rebuilt...
Yep. The arms should not be level because of the gears. The driver side arm should be just a bit higher than the passenger. The window is still solidly in the channel thanks to J Mack’s duct tape trick.
3Sp,transfer case, overdrive, bell housing, It did run great but would not shift in the overdrive unit , I took the overdrive apart and all I see is the shifter on the overdrive weld is broken and I also think the synchro snap ring might be...