EWheeler's latest activity

@Chamba , Liked your explanation of RHD choice. Lucky that some manufacturers decide to offer a driving position on the other side for the rest of us. In addition to Land Cruisers I also like Land Rovers (yeah, I know). Long time ago I...

Spam musubi!!!

170 miles today. Filled with fuel before I left and topped off when I got home. 13.8 mpg - ran about 75 miles of gravel including some 2 track that was 1st and 2ng gear slow speeds. Ran 60-65 on the big highway, 50-55 on two lane. Not...

Dave has supported GSMTR off and on for years! Support 4plus! A small business that supports us!

@bluehawk - anything to add to this discussion?

here we go. Just did the one for now as today was a lot busier than i thought it would be. so this is set up to be cut from a 2.4x1.2m sheet of steel, not sure what US standard sizes are. But thats about 4 feet high. as cut, you will get an...

I had a project that only required the outter shell of a barn door. This is the UPPER half of the inner shell, which i believe can be used to repair a lower inner shell. Slightly thicker than the lower portion of the in lower shell as show...

Had a project that required only the outer skin of a barn door. Salvaged this unit off the inside. I know there are re-pop pins and handles, but if you need the whole thing, here you go. Works as intended. $80 mailed in the lower 48.

Passenger Door:

Drivers door (US drivers side)

Got these with a hard top and dont need the doors. From a South American BJ42, little bit of rust in the bottoms. I chipped off the body filler to expose it to be as honest as possible about the condition. Magnet tested the rest of the doors...

I didn't get a good pic of the before...was in too much of a hurry that day I guess But the after is much cleaner. Not only the powder but the passenger fender losing all that MSD nonsense

…

I had someone reach out that really wants the red ‘74 carrier….. I have a couple other options to offer in trade, or can fill that void with cash. When are you back in the shop to take a phone call?

Considering 🤔

Pending sale to Av8or who was first to the line.

I realize that many here are making a living off of the increased value of these old vehicles. I don't want to see their livelihoods affected but... I "think" I'll be really happy when nobody wants them and I can stop worrying about where I park...

The price is $35,000. I purchased this Jan 1976 FJ40 from Dallas, TX in Nov 2015 and had it shipped to Huntsville, AL in a closed hauler. Additional photos and work I’ve completed over the years are at the following link: 1976 Toyota Land Cruiser...

Got the axles home and unloaded. Ready to set them in place with those new parabolic springs! Big shout out to Garrett at Valley hybrid in Stockton. Very knowledgeable and professional individual.

Passenger side done.

Had the Dakota Digital cluster face plate painted black to match the rest of the dash with the color scheme I have going on. Got it back from paint today. Set in place just to see how it looks. Parking brake and throttle pedal in place...

I vote leave them as is.

First pic of the Redline kit on. I’ll get some better photos once cleaned up. No complaints here on the redline kit…

We wheeled Blanca Peak today and were surprised with how technical the trail is. We had a great time though I wouldn’t come back with any of our other vehicles. We are off to the next destination tomorrow morning, which will be something more tame.