97 AZ LC

Camelback Toyota has been dead in the water since Murf left, that is on Land Cruisers, still a fine dealership.

The 2 pinion isn't a problem in the 80 series or the early 100 series. The 100 series "problem" is just one of those myths that never goes away. People can't get their head around the fact that the "more robust" 4 pinion is under-engineered for...

Model year would be helpful.

But his risk is of being stranded, and he may have good tow coverage.

Regarding the '98-'05 V8 4.7..... Do you have any supporting information to get remotely close to proving that?

UV?

To reset the tensioner - if you don't have a big vice you can use an 8 inch C-clamp (Harbor Freight $9) and a six inch long piece of 1 inch inside diameter PVC pipe (Home Depot). If you misplaced the pin you can use a 2 mm hex wrench.

Why not fix it since it is not too late?

Indeed, you should fix it. The peace of mind gained will be worth it.

The alternative is not to just let your valve cover leak. The alternative is install a clamp a la post 38 which will easily stop it from leaking. The torque setting on the bolt is 53 inch pounds. You deemed the clamp to be unaesthetic but it's...

You'll be fine as long as you do all the work yourself.

I had a similar thought, not necessarily Imron, but a single stage non-metallic. I'm willing to sacrifice a new car look for some durability. Of course I want to do it myself and would want the non-metallic paint to be close enough to the...

What's a bit confusing here is that it's not called Dexron III anymore. GM owned the rights to the name, licensed it to others, and then discontinued use and cancelled all the licenses. So nobody can call it Dexron III anymore, has to be called...

I use - Robot or human? - https://www.walmart.com/ip/Valvoline-DEX-MERC-Automatic-Transmission-Fluid-ATF-1-GA/15125788 - good fashion Dexron III, exactly what the factory calls for.

I'm going to go with space aliens. If they can come from another galaxy they can get into a Land Cruiser and then lock it up again. What were they doing - some activity that we're not yet familiar with. We know they prefer to infiltrate rural...

And what's the report on the engine?

Why? 07s have some problems but nothing that the 06s don't have.

I agree with yj668. You might as well fill the radiator and overflow tank with water and try to start it up. If you get calamity shut it off. If it runs OK check to see if you can find the leak. Take off the engine cover ( four 10mm...

Here’s what you can potentially do to help meanwhile. If you had the hundy towed home, it’s best to check the source of leaks yourself unless you can get an honest shop to perform the inspection because this can potentially lead to a costly...

Maybe some Aussie friends can chime in. Here in the U.S. a 1FZ-FE is an 80 series motor. Maybe try some keyword searches over in that forum.

Doesn't need to be a Lexus specific shop. A good honest general repair shop can do most of the work on a 100 series. Being a self sufficient engaged problem solver is a mind set, one that will be helpful to you and your kids over the long term.

Don't go in there anymore. And if you're not going to work your own vehicle you should probably convert.

The problem started with the 2000 model year "upgrade". You're good.

Some info on rebuild kits, note pages 2 and 656. https://natpronet.com/products/

Take the pan off, not that hard. Post some pictures of what you find.