Hoosier Daddy

Wow, that thing sits up high and tight! Not so sure about those bowlegged center uprights though.

Decided to try some different tires for daily driving. 37” KO2s in C on my non-beadlock RWs rocking @turbo8 rings, which are sick. Compared to my worn KM3s, it’s like riding on a cloud

Okay so an update after another 8 hours on this thing. I took the pump apart three times as each time I had a no turning of the pump, until the last time when I clocked the gears and aligned the slot on the gear cylinder notch properly. There...

The third mount on the steering rack does unbolt, worst case the tabs that mount it to the rack body would need to be trimmed, then the diff actuator should clear. Since the Tundra makes do with two mounts, perhaps the 200 can, too. The front...

Husky coverage shown. I don't think it will cover 100% of your problem, but it will get most of it.

Well, no, not really. Those videos compare a new Prado-based Land Cruiser horn to the Premium horn. Not a 200 series horn. Having bought the Premium horns and compared them to the ones on my 200 series, my experience tells me there is no...

Maybe this is the type of thing you're looking for, assuming the seller can send you a photo of the actual product? https://ebay.us/m/YcIA2T I had built my own custom TRD style grille last year by cobbling together an aftermarket 200 grille and...

Anyone have an 80 series stock rear sway bar my son could buy?

Old thread but I figured Id add to it a little since it helped me. If you do not have a small enough pair of pliers to compress the 2 plastic ears try the following. 1) Use a small flat screw driver (I put a bend near the tip so it fit better)...

I bought this years ago when dealing with the same issue. Used it for a million different things since:

I’m a fan of these wheels. For anyone with a 2015 and older LC, you can use the 2016+ LC wheels on the 2015 and older models by replacing the front hub grease caps with the lower profile 2016+ LC grease caps. Otherwise, the center caps will not...

Consider the possibility of an exhaust leak at the exhaust manifold. The passenger side manifold cracked on my 2010. The diagnosis was made by hooking up a shop vac to blow air into the exhaust, and then soapy water was sprayed through the...

I actually kind of dig the white methods.

I have this great idea for a club t-shirt, but I'm not an artist, so I thought I'd try my first thing with AI. @TK470 and I fed a few of these tools this text, and I'm sure you'll be just as amused at the results as we were. ChatGPT Gemini...

We have them all in stock here in Murray, Utah Part# SUS48068200ROEM - OEM URJ200 Front Lower Control Arm w/KDSS - RH Part# SUS48069200LOEM - OEM URJ200 Front Lower Control Arm w/KDSS - LH We have cam bolt kits in stock too. Those may be...