Brindleboxer

Jose, Looks like it was a good road trip. That crew cab is awesome. On a side note, I have been working on my 80 again and went away from the LS swap and will either leave it stock or do the Cruiser and Company turbo if the price point for the 94...

May I suggest reaching out to American Modern, there used to be an agent in my AAA office, they offer specialty coverage policies. I will admit that I have not had to add or adjust the policy in a while and things may have changed for new...

I have never seen any documentation for a "Heritage" series 80. Could they possible be products develop for other markets and finally imported here, possibly but I still doubt it.

Gluethread EFI fuse Fusible link Fuse kit Coolant, oil (PS, engine.....) Belts Extra hardware (....knuckles) Volt meter Spare part (starter, alternator, battery)

I have read posts in the past (6 years or so, that is the last time I had an 80 with a lift) that this happens on some trucks and IIRC they just shave about 8mm or so off the top of the arm. I would do a search to see if there is any new...

Let's look at this objectively. Yes your hose blew and you had the water pump and alternator replaced but doing these repairs in and of themselves should not afford the opportunity to produce an oil leak. The leak may be coincidental to the...

The hose in your picture is likely the one that is used with barn door models so not used on our models.

Dewey, Follow what Jon has laid out and you can work from there. You will find he is a wealth of information.

Nothing from the distributor runs to the starter. Download the Toyota FSM and EWD from the resources section. If the distributor wiring has been modified/molested then that's likely your issue. Spark is developed from the pick up coils inside...

If you go to Tahuya, shoot me a message. I am South of you, and it is about the same distance for me. Mine isn't kitted out like some but having a second vehicle might add some degree of reassurance when out there. Another thing to consider is...

First, welcome back. The Peninsula has a lot of opportunities for camping but fewer locations for wheeling comparatively. Tahuya is nice and has both camping and an off-road area. An advantage is there are various difficulty trails, and many have...

Be aware that the process for dropping the headliner on a pre-95 is a lenghty process and you essentially have to remove everything on the inside beltline up. Some people find a 95+ setup and convert to make it easier later on. There is another...

yes. yes, it is.

The North Sound Cruisers are having a meet and greet at an event in Snohomish, looks like it could be fun. Events/Trails - Sun Aug 3rd-Field of Wheels 4x4 -Craven Farm, Snohomish -...

Looks like this might be a fun time. I will see if I can get my Cruiser up and running and my butt out of bed for a 2.5 hr drive North:) Will also throw this in the South Sound group.

Really interested in the price point of the OBD-I kits. Was going to go LS but the mechanic that was going to do the swap for money owed passed away and I am starting over again. Would love to keep the Toyota!

No… they will be going away for something better… but still Toyota/aisin made Super close to having @efjayatee 93 done. A bit of testing then it will be available. Will be more expensive due to electronics Thought hard about water to air. End...