I just brought home a 60 that had been sitting for 1.5 years. In the last 2 weeks I have added a battery, fusible link, starter, fuel filter,plugs, fuel pump, Heet fuel treatment, 9 gallons of fresh fuel. It had approx. 5 gallons of old fuel.
The truck would not run without pouring gas into the carb prior to the fuel pump install. Now it will crank, run for about 4 seconds, then die. It will recrank immediately, run for 4 more seconds, then die again. And so on.
I have sprayed carb cleaner into the fuel intake port
Any ideas?
The truck would not run without pouring gas into the carb prior to the fuel pump install. Now it will crank, run for about 4 seconds, then die. It will recrank immediately, run for 4 more seconds, then die again. And so on.
I have sprayed carb cleaner into the fuel intake port
Any ideas?