Okay so I just bought and installed new headlights (stock). I started with the driver side low beam then driver side high beam. Next I moved to the passenger side and did the low beam first. It should be noted that after I installed each headlight I would turn on the headlights and then the brights in order to check my work. I finished with the passenger side high beam and went to check my work. I flipped on the lights and nothing turned on. I tried the hihg beans and nothing as well. I'm thinking it may be a fuse problem but the outermost lights on either side are still turning on. I don't know much about wiring and am not sure if this could be the issue, however I did not play with any wires. What seemed like a plug and play job has turned out to be a little more frustrating than I thought it would be. Any help is much appreciated. Thank you in advance!