YWST: Front Wheel Bearing Overhaul Kits for the 100 Series (LX470) (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Any idea when they are going to be back in stock again? Need to order a couple of them
 
ashkapur said:
Any idea when they are going to be back in stock again? Need to order a couple of them
Click to expand...

Sorry for the delay, I’ve been out of the country. We had all the parts to assemble kits, just waiting on bandwidth to get them all put together. We have both Timken and Koyo kits back back on the website :cool:
 
cruiseroutfit said:
Sorry for the delay, I’ve been out of the country. We had all the parts to assemble kits, just waiting on bandwidth to get them all put together. We have both Timken and Koyo kits back back on the website :cool:
Click to expand...
Any chance there will be more of the kits available on the website soon?
 
UMcruiser said:
Any chance there will be more of the kits available on the website soon?
Click to expand...

I'm currently traveling so I'm not sure when the missing part is due. I'll look into it.
 
Tempted to embark on this for my LX. Are there any special tools required to get this job done beside a brass drift and snap ring pliers?
 
packeted said:
Tempted to embark on this for my LX. Are there any special tools required to get this job done beside a brass drift and snap ring pliers?
Click to expand...

Pull scale and 54mm socket are recommended too. Let us know if you have any other questions.
 
packeted said:
Tempted to embark on this for my LX. Are there any special tools required to get this job done beside a brass drift and snap ring pliers?
Click to expand...
I hear having something to pull out the cv axle to install the snap ring is pretty helpful😉
 
cruiseroutfit said:
Does your 100 Series (LX470) need some front end attention?

Yeah, We Stock That!

For over 20 years we've specialized in all things Land Cruiser including assembling some of the most comprehensive and high quality axle kit offerings. Our 100/470 front wheel bearings kits are no different, utilizing components from NOK, Timken or Koyo, and Joint Fuji, all the OE suppliers to Toyota at a fraction of the dealer price. The 100/470 kits come complete with everything needed to repack one side of your front end, inner and outer bearings & races, the wheel hub seal, the spindle thrust and lock washer the hub flange gasket. In the event you need any of these components individually or have another need during your wheel bearing overhaul, we stock it! Cone washers and stud parts, dust caps and even the complete wheel hub assembly.
Applications:
1998-2007 UZJ100
1998-2007 LX470
1998-2007 HDJ101

Please note each FAWB9807T/FAWB9807K covers one side of your 100/470 so you will need 2 kits for a complete front wheel bearing overhaul.

View attachment 1349623(Contents of kit, Part# FAWB9807T)

Part# FAWB9807T - $87.50
100 Series IFS Wheel Bearing Kit - Timken (OEM) - Includes:
1 x Timken Inner Bearing/Race(Large)
1 x Timken Outer Bearing Race(Small)
1 x HUB70011 Disc Wheel Seal
1 x HUB60070 Drive Flange Gasket
1 x FA42030 Disc Spindle Thrust Washer
1 x FA42025 Disc Spindle Lock Washer

OR

View attachment 1902768
(Contents of kit, Part# FAWB9807K)

Part# FAWB9807K - $97.50
100 Series IFS Wheel Bearing Kit - Koyo (OEM) - Includes:
1 x Koyo Inner Bearing/Race(Large)
1 x Koyo Outer Bearing Race(Small)
1 x HUB70011 Disc Wheel Seal
1 x HUB60070 Drive Flange Gasket
1 x FA42030 Disc Spindle Thrust Washer
1 x FA42025 Disc Spindle Lock Washer

We just finished up assembling a few dozen more kits:

View attachment 1349621
(Part# FAWB9807T shown during kit assembly)

It's also recommended you consider our snap ring kit (Part# FAWB9807KIT), it contains all 6 of the various sized snap rings offered by Toyota. The installation instructions (supplied) will instruct you to measure the snap ring groove reveal after you have completed the bearing setup and drive flange installation. Having various sizes to fit the groove reveal is important and while many luck out and are able to utilize their original snap rings and land within spec, some are not. Consider having these during your rebuild.

View attachment 1349633

Part# FAWB9807KIT - Includes 6 Clips - $14.50

Please call the shop if you would like to place an order:
801-563-1277 - info@cruiseroutfitters.com
www.cruiseroutfitters.com

Order online @ CruiserTeq.com
cruiserteq.com

Cruiser Teq | Powered by Cruiser Outfitters

Cruiser Teq is powered by Cruiser Outfitters. Get high quality OEM and aftermarket Land Cruiser parts direct to your door, fast!
cruiserteq.com cruiserteq.com

View attachment 2289813
Click to expand...
That looks good but shipping to Australia prohibitive in terms of time and money :(
What's the problem with the HDJ100 (or my HDJ100R)? No Timken for it exists?
 
Antipodes4WD said:
That looks good but shipping to Australia prohibitive in terms of time and money :(
What's the problem with the HDJ100 (or my HDJ100R)? No Timken for it exists?
Click to expand...

Our same Koyo and Timken kits fit the HDJ100 too, they fit ALL model IFS 100's and LX470's
 
You must log in or register to reply here.

Similar threads

cruiseroutfit
Celebrating Christmas with the Wasatch Cruisers
Replies
0
Views
1K
cruiseroutfit
cruiseroutfit
KansasFJ62
White 8-spoke rims for FJ62 1989
Replies
3
Views
392
Devils Paw 80
Devils Paw 80

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Share this page

Back
Top Bottom