I thought that I would share with all you on how I routed my plug and play yellow box speedometer correction. I removed the center console by removing the three bolts and two screws at the gear selector console towards the back. This allowed the entire console to be free. I then drilled two holes. One in the plastic bottom of the console and the other through the parking brake plate and floorboard. I then plugged in the harness to the speed control sensor and removed the 4 pins from the connector to be able to fit the wiring through the two holes. From this point what took some time is to seal up the hole waiting for the sealant to dry. Put it all back together and install complete.
Last edited: