After having rebuilt the engine on my 1989 FJ62 about two years ago, I needed to fix an exhaust manifold leak and look for the issue that was making it hard to start. When I got down to the wiring harness, I found that the wires to the cold start injector were fried. That was easy enough to fix.
But I also found these broken wires and this unknown connector. The connector was lying on the driver side of the valve cover, right on top of the engine. The broken wires are quite small and are on the underside of the wiring harness. That's all the detail I can think to include.
But I also found these broken wires and this unknown connector. The connector was lying on the driver side of the valve cover, right on top of the engine. The broken wires are quite small and are on the underside of the wiring harness. That's all the detail I can think to include.