will 70 series driver/ passenger mirrors work on a 60 series

[Young Pete]

 

[IH8Wood]

Not really an answer to your question, but if they're from a RHD vehicle, and your installing them on a LHD vehicle, when the mirror swings away, they may not stop where they should.

 

[lowenbrau]

Work? Yes. Work well? not so much

https://forum.ih8mud.com/showpost.php?p=1120502&postcount=10

 

[Godwin]

I have 70 series mirrors on 2 of my 60s and as far as I'm concerned this is a huge improvement over the miniscule stock mirrors. Sitting in the driver's seat I don't notice the small gap between the mirror base and the door skin. What I do see is the much improved rearward vision.

The ones I have were take offs from Canadian mine trucks, don't know if they are LHD or RHD. I have no problem with the adjustments.

 

[SLOwag]

...some more discussion. Some like it, others don't.

https://forum.ih8mud.com/showthread.php?t=142472&highlight=mirror+truck

 

[brownbear]

Work? Yes. Work well? not so much

https://forum.ih8mud.com/showpost.php?p=1120502&postcount=10

I'm forgetting a bit of info.... but I have 7x mirrors on my 60. The gasket that fits under the mirror may be the one from 60... but I can't remember. I do have a slight gap. But the seal/gasket that went underneath was soft and flexible. I never had a as big of a gap as seen in this picture.

They fit and look fine.

 

[Sherpa 60]

I've had 70 series mirrors on my 60 for close to 10yrs. Got them thru a vendor who sourced them off mine trucks in Canada (no clearance/no mirrors!). They don't conform the door panel as a 60 mirror would, but a bit of a gap isn't really a problem.

Only other option at the time was Australian 60 mirrors or 62 mirrors (electric). A number of aftermarket suppliers have 62 style mirrors that are manually adjusted. Don't know about quality of these.

Bottom line....70 mirrors are a huge improvement over the U.S. OEM sets, IMO.

 

[notagp_afj55]

have them and love them. They are such a huge improvement
over the original OEM ones that the gap between the base and
the door are not even a concern.. You should get a set if you
can. i wish i had switched a long time ago

 

[theSherpa]

the only thing about them that isn't 100% is the gap, which I could care less about. used the FJ60 rubber. they're great, and better looking than FJ62 mirrors. they really work.

Steve