What are you working on? (5 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

PXL_20250412_194914419.jpg

PXL_20250412_195057217.jpg


Changed the oil 2 and a half weeks after the last change.

Also fixed the vent that I destroyed installing the grab bar the day before I left VA.
 
I had time today to pull the rear actuator. After breaking two bolts after applying heat, I pushed the easy button and grabbed a spare that came with the extra diff I bought. Also drained and filled both diffs and t-case, now that the gears are broke in.

IMG_2049.jpeg
 
As I am getting older those 21 year old faded plastic headlamps on the GMC made it hard to see at night. Hope new lights will fix that!

IMG_2055.jpeg
 
After three rounds of SOS pads I am thinking clean and paint my be in the future.....these will be going on Lynchburg Lemonade with some other changes.

IMG_2056.jpeg


IMG_2057.jpeg
 
Successful day yesterday. Placed the engine and moved the hoist out of the way for a while! Happy with how the welding went.

IMG_5591.jpeg


IMG_5593.jpeg
 
doseman said:
Outlaw 2’s? What size tire?
Click to expand...
Knock offs, but similar, no clear coat. If I can clean them up enough, I will spray a coat of clear on them. 35 x 12.50 x 15. I need to off set the 10% underdrive from the split case 4:1 gears I plan to install behind the H55f.
 
IMG_1740.jpeg

IMG_1772.jpeg


Before and after. Not cruiser related but holy s*** has this been a journey…
 
Another win, cleaned and set the intake back on and then set the hood back on for a while so I could ditch the tarp and help the junkyard look in my driveway.

IMG_5595.jpeg


IMG_5599.jpeg
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 6 (members: 0, guests: 6)

Share this page

Back
Top Bottom