Web access to repair manuals - All Makes and models back to 1970 (2 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 27, 2003
Threads
58
Messages
12,519
Location
Somewhere in the foothills...
Found this information today.

Bedford Public Library -- AARC

Click on the ARRC icon.

ID: lib
PW: access

These manuals are not a replacement for the official Toyota FSM but the information is basically the same.

-Mike-
 
Last edited:
Hmm. Tried BackStreet Browser but couldn't get it to work. Any ideas?
 
Well, I perused the site and found the TSB's. Three applied to the Corolla - one about rear bearing hum, one wind noise, and one a loose weatherstrip. The rear bearing hum cure was 1.1 hours of labor and the hub assemblies. So, I checked to see if I could get it and the dealer told me it was going to take 4 hours, and I had to pay since it was out of the warranty period. $776 (plus tax). I bought the hub assy's ($235 with discount) and did it myself - 1.1 hours was about right. That comes out to about $500 per hour...

The moral of the story is: Check those TSB's.
 
Sounds like my Camry. It was four bolts off, four bolts on after the wheel came off. I guess it would be about 1/2 hour per side.
 

Users who are viewing this thread

Back
Top Bottom