Hey all, I picked up a Warn m12000 12v for pretty cheap. I tested it and it works as expected.
Unfortunately the sn # is rusted off so I am unsure of the exact model. I reached out to warn support for assitance. Once I know what I have I will order new gaskets.
I looked through the different diagrams and the only other identifiable parts is the remote switch(joystick) and it doesnt have steel balls.
I took everything apart and the gears look good with no signs of rust. The drum assembly and support has some rust. The motor can be cleaned too, but I will just purchase the 9.5xp motor.
The plan is to clean, coat, grease, assemble..
External Coating - Would ceramic coating be an option? I'm wondering if it would help with heat? If not I would probably just coat with rustoleum. I dont want to powder coat.
Internal Coating - Is there anything that can be applied for longevity/anti rust?
Grease - Warn recommends aershell 33ms. What other options do I have with the same quality?
Any tips/insight would be greatly appreciated.
Thanks,
Unfortunately the sn # is rusted off so I am unsure of the exact model. I reached out to warn support for assitance. Once I know what I have I will order new gaskets.
I looked through the different diagrams and the only other identifiable parts is the remote switch(joystick) and it doesnt have steel balls.
I took everything apart and the gears look good with no signs of rust. The drum assembly and support has some rust. The motor can be cleaned too, but I will just purchase the 9.5xp motor.
The plan is to clean, coat, grease, assemble..
External Coating - Would ceramic coating be an option? I'm wondering if it would help with heat? If not I would probably just coat with rustoleum. I dont want to powder coat.
Internal Coating - Is there anything that can be applied for longevity/anti rust?
Grease - Warn recommends aershell 33ms. What other options do I have with the same quality?
Any tips/insight would be greatly appreciated.
Thanks,