Warn 8274 wiring?

[gnob]

Thanks for the feedback. Are you talking about the copper wires that are hooked onto the carbon bushings?

where the motor studs pass through the case. there are bakelite insulators. ive seen numerous fail there.

 

[gnob]

Good to know I just keep seeing posts on people getting them for 200ish for rebuild projects. Still crack open the case and see what needs to be rebuilt inside. Should be a fun project. I’ll be putting it on my fj40.

i just dug back through my ebay stuff. the seller i bought from is no longer on there.
either way $325 isn't really a bad price for the xp motor.

 

[nicholas]

I ended up getting he 70865 for $390 shipped/no tax from these guys. Sounds like it’s a good upgrade in terms of speed and winching capacity.

Warn 70865 - For Series 15 Industrial Winches

Warn 70865 - For Series 15 Industrial WinchesS/P MOTOR KITFor Warn Series 15 Industrial WinchesGenuine WARN Replacement parts to restore and maintain the legendary reliability of your investment.Legendary WARN Quality

www.cspracing.com

 

[1911]

I ended up getting he 70865 for $390 shipped/no tax from these guys. Sounds like it’s a good upgrade in terms of speed and winching capacity.

Warn 70865 - For Series 15 Industrial Winches

Warn 70865 - For Series 15 Industrial WinchesS/P MOTOR KITFor Warn Series 15 Industrial WinchesGenuine WARN Replacement parts to restore and maintain the legendary reliability of your investment.Legendary WARN Quality

www.cspracing.com

Depending on the age of your winch, you may need to buy the newer splined pinion gear for the motor to replace an older one with a keyway. These are readily available from Warn dealers.

 

[nicholas]

Depending on the age of your winch, you may need to buy the newer splined pinion gear for the motor to replace an older one with a keyway. These are readily available from Warn dealers.

Thanks, I pulled off the old motor and it looks splined. I heard something drop off into the case when it did that but I’ll be opening it up anyways.

 

[Fj80oregon]

I just did what your doing with new xp motor, except I added a new contactor pack from warn. I should have added a drain and fill plug on the case for future service. Will prob add drum supports next time I am in there also.
Parts I used
xp motor #68608
Control pack #102399 cam with power wires also
Splined gear #98380
Pawl brake kit with zerk fitting #7605
Brake rebuild kit #8409
Drum service kit #8680
Needle bearing #98374
Used a timken bearing 17x40x12mm part number #6203-2RS

 

[dazerb]

Following... mine is older too. No nut on bottom