ARCHIVE Victory4x4 prototyping part 2 (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Washingtontaco said:
Mine was ordered mid May, this Friday will be a full 12 weeks. Hopefully ships the end of the month, I have a trip in late September to CO, UT and the week I get back I'll be instructing at the Panhandle Overland Rally.
Click to expand...
Ha, you've got 6 more weeks, plus 2 for powder coat and 1 for shipping! I'm kidding, kind of. This "new" economy sucks, but I'm getting used to it. What can you do? I ordered full skids from RCI, and they're coming in piecemeal, every few weeks/months. Again, what can you do? I don't think vendors are intentionally screwing us over. I also do see prices EVER returning to pre-pandemic levels, so I went ahead and pulled the trigger on this stuff now. It's only going to go up. Front bumper options for the GX are still pretty limited, and I like the blend of function and form on the Victory MUCH better than anything out there. Don't see the supply chain/labor issues getting any better soon.
 
re_guderian said:
Ha, you've got 6 more weeks, plus 2 for powder coat and 1 for shipping! I'm kidding, kind of. This "new" economy sucks, but I'm getting used to it. What can you do? I ordered full skids from RCI, and they're coming in piecemeal, every few weeks/months. Again, what can you do? I don't think vendors are intentionally screwing us over. I also do see prices EVER returning to pre-pandemic levels, so I went ahead and pulled the trigger on this stuff now. It's only going to go up. Front bumper options for the GX are still pretty limited, and I like the blend of function and form on the Victory MUCH better than anything out there. Don't see the supply chain/labor issues getting any better soon.
Click to expand...
I'm saving two weeks on the powder coating. Ordered it raw, I'll fit it figure out what and where I want to drill holes, etc. and send it to my buddies shop for powder coating. Drop off Monday, pick up Friday, install Saturday.
 
forum.ih8mud.com

For Sale - 2014-up GX460 Victory4x4 Blitz Prototype

This is a prototype gx460 front blitz winch bumper. It’s close to a production version, but is missing some additional clearance we put for large tires (can be trimmed) and one week is slightly not perfect. Retail is $1300 + freight. You can have this one for $800+ freight. Will include need...
forum.ih8mud.com forum.ih8mud.com
 
Super excited - just ordered the strike rear bumper, adventure carriers, and the tailgate table. Can't wait to get this stuff on the rig! Anyone have any recommendations on what lights to use on the rear bumper? I've been thinking a Diode Dynamics Stage Series pod would be nice, but not certain on what I need in terms of mounting / lighting flood.
 
Last edited:
Fixing up the red GX lower doors from Colorado.

938ED890-4107-4F83-AD61-36ED3F52C7D7.jpeg
 
Probably a long shot, but I know I would love and have seen a lot of interest here and on GXOR in a non full bumper based rear tire carrier swing that swings with the door. They typically use the location of the rear lower light for the hinge but wonder if there is a way to work around that.
 
brimy311 said:
So we are winding down from the GX460 platform. Any parts we missed that you would like us to consider?
Click to expand...
Probably a long shot here as well, but I’d love to see two things:

1) Some sort of bottle opener attachment for your adventure carriers

2) An aluminum auxiliary fuel tank to mount in the factory spare tire location. Trail’d makes some plastic ones that are not hard mounted, but I’ve read questionable reviews. I bet that a permanently mounted auxiliary fuel tank would gain a lot of interest since most folks are running the spare on the bumper (and the GX drinks fuel).

You’ve done an awesome job with the platform, and I’m looking forward to any other products!
 
brimy311 said:
So we are winding down from the GX460 platform. Any parts we missed that you would like us to consider?
Click to expand...
What's happening with the rear shelf, between the rear quarter MOLLE panels??
Is that still a go? I've been waiting on you guys to finish it so I can get one to go with your rear quarter MOLLE panels I already have installed!
Please keep me/us posted!!!
 
r2m said:
What's happening with the rear shelf, between the rear quarter MOLLE panels??
Is that still a go? I've been waiting on you guys to finish it so I can get one to go with your rear quarter MOLLE panels I already have installed!
Please keep me/us posted!!!
Click to expand...

I think this is already available

www.victory4x4.com

Upper Shelf - 4Runner, Land Cruiser, GX & LX - Victory 4x4

Offering quality steel and aluminum goods for Toyota and Lexus 4x4s.
www.victory4x4.com www.victory4x4.com
 
Skorcher said:
As far as I'm aware the only options for a 3rd row delete are either Goose Gear or custom. Maybe you guys would like to take a crack at it?
Click to expand...
Exactly what I would vote for. Aluminum with lift up storage would be awesome.
 
alefer5 said:
+1 on those lower shock guards. Btw, front skid as is works with treaty oak spacers.
Click to expand...
Rago lower shock guards for 5th gen 4Runner fit GX 460, would imagine anyone elses would as well.
 
You must log in or register to reply here.

Similar threads

Cj80cruiser
Victory4x4 bumper install on 2014 GX460
Replies
11
Views
2K
Cj80cruiser
Cj80cruiser
C
Starter solenoid connectors, 2 different ones? Anyone have the part numbers?
Replies
4
Views
413
CBdeJ
C
Caveman Cruiser
Victory4x4 rear bumper and swing outs long term review.
2
Replies
30
Views
7K
Caveman Cruiser
Caveman Cruiser
Tyland Cruiser
Part Number? / Part Name?
Replies
5
Views
684
OffRoadScott
OffRoadScott

Users who are viewing this thread

Total: 2 (members: 0, guests: 2)

Share this page

Back
Top Bottom