SOLD Utah/ toyota/FJ40 PTO winch

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 16, 2019
Threads
3
Messages
17
Location
Utah
Vehicle Model
  1. 40 Series
I hav a complete FJ40 OEM PTO Winch, it’s in working condition and according to previous owner all oil seal and bearings for the winch and TC adaptor has been replaced.. drive shafts bearings need to be replaced and the U joint coupler connected to the winch is not in best shape,
Please check the pictures.. asking for 2500$ or best offer.. mob. No. 8018662539 thanks

386A3B95-7F05-4265-B608-B65B701AD22D.webp


AF60EC47-96BC-4CF3-85CE-04039F5A93FF.webp


D8D927D8-6483-4EBC-B62E-D4690F592528.webp


3B3C5BB0-C6D0-470A-A660-9BFC08AB35BC.webp


02D39ECF-CAFC-4D58-8F7B-86561F531E76.webp
 
newer 1981+ setup?
3 piece driveshaft, missing frame mounts
1 gear PTO is not from a 40
extra linkage rod?
@Living in the Past
 
@3_puppies


No not from a 40 series. Not because of the extra driveshaft but because of the single direction PTO. 10/82 the 40 series switched the third section. 11/84 was the start of the single direction PTO. 60 series switched at that time as well in most markets. May be some that didn't not but not sure. 11/84 was the start of 70 series. All those were single direction. Of the few 40 series built after 11/84 those with a PTO winch it was still two direction. The worm gear in the winch with a single direction PTO is reversed from two direction.
 
Thank you guys for the clarification, I bought it as FJ40s for my project but I decided to go with electric winch.. thanks
 

Users who are viewing this thread

Back
Top Bottom