Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
The mat in your photo is for 5 speed John (raised gearbox cover). I thought you were wondering how the other style would fit a raised gearbox cover.@FJ40GURU this one is from the other side. It shows how different the opening for the PTO lever is.
View attachment 2113499
The mat in your photo is for 5 speed John (raised gearbox cover). I thought you were wondering how the other style would fit a raised gearbox cover.
79-10/82 models have flat gearbox cover and use floor mat with larger TOYOTA in the middle (same as the reproduction ones). The photo I shared shows how this type of mat fits on 83/84 with raised gearbox cover. The mat doesn’t fit perfectly around transfer case stick.Not sure what your saying, OEM floor mat but what what year. 10/82 floor mats changed on the four speed.
10/82 all inspection covers are raised H41/H42/H55F. Only difference is the location of the transfer lever. This is the hump section from either 83 Ute or trayback. Those only came with a four speed with the raised hump section.View attachment 2113745
Funny story on the way back: I went to renew my Global Entry at the airport. After the officer asked me what I do for a living, the interview quickly turned into, "Really? Which models? What years? You own a FJ40?". Needless to say, I passed with flying colors.Welcome home Roger! It looks like you had a good trip. I like the grey wheels!
Yes, and we have some synthetic sands now that have a melt temp just over 4000F for high temp casting.Just curious, can you do a mold for silicon borate glass ? I am not sure of the material for the mold but believe it melts at a lower temp than a lot of metals.
Yes, and we have some synthetic sands now that have a melt temp just over 4000F for high temp casting.
We need a 3D model. Do you have any 3D modelling software?Well, how to I proceed with a drawing ?
We need a 3D model. Do you have any 3D modelling software?
Free 3D modelling software:
Best Free 3D Modeling Software for Beginners in 2024
With the right software, anyone can learn 3D modeling. So, here's the 10 best free 3D modeling software tools for beginners.all3dp.com
We can work with most formats. STEP, IGES, NX etc
Floor mats out of LX 5 speed with raised gearbox cover with transfer case opening at exact correct position (Top mat). Late model 83/84, 4 speed with raised gearbox cover.79-10/82 models have flat gearbox cover and use floor mat with larger TOYOTA in the middle (same as the reproduction ones). The photo I shared shows how this type of mat fits on 83/84 with raised gearbox cover. The mat doesn’t fit perfectly around transfer case stick.
The mat with the smaller TOYOTA logo in the middle (same as the one you shared or the one below) is correct for raised gearbox cover.
View attachment 2113867
Just fitted the repro floor mat to an '83 US spec 4 speed FJ40 with raised cover. The only trimming needed was to enlarge the front part of the trans shifter hole.
View attachment 2124232View attachment 2124233View attachment 2124234View attachment 2124235View attachment 2124237