Maybe you could ask them to do you a custom order.
Unobtainium (4 Viewers)
- Thread starter Racer65
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
JohnnyC
Long ago TLCA# 2231
Roger love seeing these individual parts come to fruition... at some point when are we going to see the assembly line spitting out complete trucks?
Just wondering how much time I have to get $$$$$ together
Just wondering how much time I have to get $$$$$ together
Vae Victus
Posting more than I know
Rodger you sure are a lot nicer to deal with than some other unnamed OEM parts sellers that got all uppity over the past two or three years.
I just wish you had access to the whole parts catalog.
I just wish you had access to the whole parts catalog.
Would these happen to be the same as my fj43 windows?
Roger, how about seals for glass to vent window frame and also driver/passenger glass where it sits in the regulator frame?
Living in the Past
SILVER Star
Would these happen to be the same as my fj43 windows?
Pretty clear this window is longer than the ones Toyota used. On the mid wheel base hard top a second narrow fixed window was used to fill the extra space.
- Thread starter
- #1,747
What year? Hardtop or FST? All types are available.
1970 hardtop. Available from Toyota?
- Thread starter
- #1,749
Discontinued by Toyota, but available from me:
Vent Window Weatherstrip / Seal for '65 to '74 Land Cruiser FJ40 - Set of 2
Was was referring to the primary seal holding the glass to the small steel outer frame not the larger one to 1/4 window outer frame.
- Thread starter
- #1,751
If you're referring to the glass run channel, that's available too:
Front Door Glass Run for '64 to '74 Land Cruiser FJ40
- Thread starter
- #1,752
A sleeping beauty lurks underneath...
- Thread starter
- #1,753
New OEM 16" split rim. Notice the 16 x 5.5 marking. Does not come with clips, however.
- Thread starter
- #1,755
I think you can still get it in Europe. Unobtainium in the United States.
- Thread starter
- #1,756
You might do a double take when you come across this next item. Reproduction FJ40 power steering pump:
Wow. Just wow.
- Thread starter
- #1,758
Production is now being planned. There are a few variants we can make. The above model is 44320-60040. Definitely there will be a non-U.S. version (44320-60061) with the reservoir port on the opposite side.
The pumps will use high quality HNBR rubber seals. The goal is not just replicating the original, but to make it stronger and less leak prone by leveraging modern materials, all for under $200.
The pumps will use high quality HNBR rubber seals. The goal is not just replicating the original, but to make it stronger and less leak prone by leveraging modern materials, all for under $200.
- Thread starter
- #1,760
I think I've seen those on eBay. Those appear to be pretty old stock. Some are more scratched up than others.